Świnoujska Tunnel -- CREG finishes design and Starts . . . The Świnoujska Tunnel TBM has a boring diameter of 13 46 meters and a shield diameter of 12 meters It is ordered by the PORR S A consortium which is building the Świnoujście tunnel between the islands of Wolin and Usedom in Poland The length of the machine is 101 meters and it weighs 240 tons
Tunnel construction starts for major project in Southern Poland Two massive tunnel boring machines (TBMs) have started excavation on Poland’s “Podłęże-Piekiełko” railway project The tunnels, each nearly 4 kilometres long, will connect Męcina and Mordarka in the south of the country as part of the modernisation of railway line No 104
Swinoujscie Poland TBM case-Cases-tunnel boring machine . . . This TBM will bore the road tunnel under the Swina river, connecting the islands of Uznam and Wolin The entire tunnel will be 1780 m long and the TBM will drill 1,484 m of the new road near Świną The TBM built by our company arrived in Poland from China last October after sailing through the Bering Strait and around northern shores of Russia
The TBM machine has already left for Babica - News - Company . . . The underground facility will be realized by the TBM (Tunnel Boring Machine), the transport of which has just started Machine transportation is a complex logistic operation Its largest elements will reach Poland by sea to Szczecin, and then by river to Opole
Poland: Boring of the M2 line in Warsaw continues with 4 TBM . . . The choice of the TBM (Tunnel Boring Machine) technology, which uses a machine that simultaneously digs and lays subsequent tunnel rings, is dictated by, among other things, the very low risk of ground subsidence
Poland: Transportation of the S19 tunnel TBM is a huge spectacle TBM (tunnel boring machine) to be used to bore a tunnel tunnel for S19 Rzeszów Południe - Babica expressway in Podkarpacie has been transported during the long week weekend starting on 10 November It was a big event in Poland In the very well programmed transportation, some places roads adjusted
The first of two CRCHI TBMs of Budimex-Gülermak JV for . . . The first of two TBM (Tunnel Boring Machine) shields, which will be used for tunnelling as part of the modernisation of railway line No 104 on the Limanowa – Klęczany siding section, has arrived at the port of Gdynia This is one of the key stages of the work carried out by the consortium of Budimex (leader) and Gülermak
Poland: Start-up of the tunnel boring machine for the S19 . . . The TBM that will excavate the double tunnel of the S19 highway section between Rzeszów Południe and Babica, in Poland, has started boring, reaching one of the most important milestones of the project