SCALE not respecting DHCP reservation - TrueNAS General - TrueNAS . . . Even if your DHCP reservation isn’t working you still shouldn’t see your IP address actually changing Once a lease is accepted by a client it should check in with the DHCP server once it reaches the half life of the lease time and ask to extend the lease
SCALE not respecting dhcp reservation | TrueNAS Community The current workaround I have is to set the static via the interfaces file, go into the network interfaces settings in the console, disable dhcp, set the ip alias, apply, persist, and then reboot
TrueNAS Scale: Dynamic hostname - License - Duplicacy Forum The only thing I’ve found so far that works is to check the Provide access to node network namespace for the workload setting in the app This gives the container the same host name as the machine, which in turn is static It also gives the container unfettered access to the host’s network, but in this case it will have to do Hope it helps!
SOLVED - HOST name not found | TrueNAS Community In addition to an IP address, you'll need a subnet mask, gateway address and your DNS entries You can set all of these values using the console setup menu Do you have a DHCP server? If so, perhaps it might be easier to grab the addresses via DHCP and then change it to a static address
WORK AROUND : Getting TrueNAS SCALE Server to Register Hostname With . . . No changes using the TrueNAS User Interface and rebooting would solve the problem The workaround solution is to manually edit the etc dhcp dhclient conf, comment out the lines : send fqdn fqdn ; supersede routers ; supersede domain-name-servers ; and add: send host-name = gethostname();
SOLVED - Changing hostname. | TrueNAS Community I have managed to change the hostname in two out of three locations, but just cannot figure out where to change that last one (the one in the very upper left of the Dashboard) I changed it in Network --> Global Configuration, as well as in the configuration for the SMB service, and rebooted
SCALE - DNS servers and default route not refreshing with DHCP Are the DNS servers and default router supposed to update via DHCP when TrueNAS SCALE is connected to a different network (and rebooted)? I’m running 24 10 and observing that once the DNS servers and default router are …
SOLVED - static and dhcp not working | TrueNAS Community Easy way is to set it on your router and let FreeNAS on DHCP, the lazy way (that I use by the way ;) ) In case of further questions, please inform your server specs, FreeNAS version, and router make model
TrueNAS SCALE - Installation - Console Network Setup after my TrueNAS SCALE installation and the first startup, I’m at the console and want to set the network configuration, because DHCP will not be used I tried to use the options “1) Configure network interfaces” and “2) Configure network settings”, but where can I set the IP address of the TrueNAS network interface?