Exhaust Manifolds | Warped | Page 17 - ramforum. com Broken or warped manifolds aren't a new problem,lol My Dad used to braze up FE Ford manifolds alot back in the 60's 70's as they were famous for cracking on 352 and 390 Fords
Exhaust Manifolds | Warped - RAM FORUM I see warped 5 7 HEMI exhaust manifolds all the time Here are a few pics of the last set I milled from a 2004 DR that I bought As you can see in the pics one of the ports on the end is flat and the other end of one manifold has an 1 8" gap showing light and the other had a 3 16" gap View attachment 191584 View attachment 191583 View
Warped exhaust manifolds - RAM FORUM I’m sure if I guy went through the old threads enough I could find the answer to this but the threads seem voluminous Cast iron exhaust manifolds have always been subject to warping as long as I can remember I got an exhaust tic from one in my first car, a 64 Sport Fury in the late 60s A
Warped rotors. . . or something else - RAM FORUM Just purchased a used 2014 Ram 1500 (5 7L Hemi, 4-wheel drive) from a dealership According to the service records, the replaced the front rotors and pads just before I bought the vehicle When applying the brakes I feel a pulsation through the pedal which to me feels like a warped rotor
Warped Bed Rail Caps - RAM FORUM Hello, I have a 2016 1500 RT, I came out and found the drivers side rail cap had warped up over an inch high by 3-4 inched long Nothing in the bed and the vinyl cover side clamps doesn't touch it Also it's never been in heat over 95 deg Anyone else experienced this or have a reason why
BBK Headers - RAM FORUM Exhaust Manifolds | Warped I'm well-aware that the 5 7L HEMI has a fairly common issue surrounding the exhaust manifold bolts, causing the "HEMI tick" About 10 days ago, I noticed my truck had a tapping noise when cold-started I assumed that this was the infamous HEMI tick and honestly didn't give it much thought It
Multiple Broken Exhaust Manifold Bolts - ramforum. com I took my truck (2017 Ram 1500) to the mechanic for a quote to replace the warped exhaust manifold and as expected this would be a costly fix because of already two broken bolts and possibly more once they start the job He suggested that best way to go about this would be removing the engine to
Blown Head Gasket or Warped Head??? - RAM FORUM Having a warped head or blown head gasket shouldn't cause a blockage like this Pull the water pump and make sure the inlet and outlet aren't blocked, and that the impeller is ok Most of the water pumps these days have plastic impellers that can easily break apart
Exhaust manifold belt sander question - RAM FORUM For those that used a belt sander to repair a warped exhaust manifold, did you use a table-mounted or handheld? My driver's side started ticking recently, and I will likely be tackling it myself I want to make sure the belt sander I get is able to tackle the job