Why breaking in a barrel is NOT necessary - Snipers Hide Re: Why "breaking in" a barrel is NOT necessary The reason that the barrels change velocit is the bore actualy work hardens and if you fire yout rifles at say 500 yards you can see an elevation shift somewhere around 50 to 80 rounds then they usualy settle down the reason to break in barrels is to smoth out the burs in the throat
How *necessary* is a bottle warmer? - June 2024 Babies | Forums | What . . . The views expressed in community are solely the opinions of participants, and do not reflect those of What to Expect Learn more about our guidelines Just so you know, What to Expect may make commissions on shopping links on this page How *necessary* is a bottle warmer?
Valve adjustment really necessary? | Honda Accord Forums - The . . . Valve adjust not necessary Took the '06 Accord back to the dealer to change out the chain I also told them keep the car for as long as necessary and perform whatever is required They did everything properly as noted in the Honda maint schedule No valve adjustment was necessary as it was all still within spec
Bore guide myth? | Snipers Hide Forum Is the necessity of a bore guide a myth? Below is my logical argument: Copper, nylon, bronze, and brass are softer than steel This implies that copper, nylon, bronze, and brass cannot scratch or otherwise damage steel Therefore, a nylon coated cleaning rod, copper fouling, bronze bristles
Do you really need the catalytic converter heat shield? Nope, it honestly is not that necessary YES it does help prevent fires and heat contact, but like the others are saying, just do not park on an piles of leaves, grass, yada yada Mine rusted off while driving, LOUDEST and MOST annoying noise ever
PCV Valve: replacement necessary? | Honda Accord Forums - The . . . In the old days, PCV value used to be a tune up item Is it still the case on our 7th gen, especially V6? I'm pretty sure mine is still the original and works properly Wondering if it is necessary to replace it Have you replaced the PCV? If so, why?
Suppressors - Necessary Baffle Clearance | Snipers Hide Forum What is the mechanism that demands how much clearance a bullet has through the baffles? Is it the risk of actual physical contact as there is always some less than perfect bore alignment? Or, is there some interference from energy waves that reflects off a baffle back upon the bullet if there