How to add text in new autodesk fusion 360 - Autodesk Community Step 1 Right click on the workplane or planar body face where you would like to place text Step 2 Left click select New Sketch Step 3 Select sketch Text as shown in @jhackney1972 a image File>Export and then Attach your * f3d file here if you can’t figure it out and someone will create a video using your actual file
Solved: Extruding at an angle? - Autodesk Community I swear that in a prior version of Fusion 360, the Extrude command (in Model) had an angle manipulator that let you pick the extrusion direction Now it seems as though that is missing and right-angle extrusions are the only possible kind Am I imagining that?
Solved: Problems with Offset Faces - Autodesk Community At first the splitface operations where fast but got slower each time I then started dong the offset faces and that was very slow and got slower each time For the screencast I changed the process and do the offset face command immediately after after each split face That is worling well initially but seems to be slowing down again
Solved: Reveals + Splitting Wall Surface - Autodesk Community My problem was that I confused "Split Face" with the "Split Element" tool Select a Wall > select "Split Face" (icon looks like a 90's computer screen) > go to a corner and draw a singular, diagonal line > select "Finish Edit Mode" (Screenshot attached) Now, magically, the reveals separate the exterior face of the wall for materials to be applied
How to wrap a text around e. g. a cylinder? - Autodesk Community There are approaches with "split face", but this only projects in parallel, so that it's not possible to really wrap the letters around It's not about putting the text along the length of the cylinder, but around the circle of the cylinder, e g around a cup And ideas? Thanks, Ralph
Solved: Change Family Host Type - Autodesk Community 6 The Family is now converted to Face-Based and may be saved exported from this Project to a separate file for later use Note: Only certain Categories are available for Copy Monitor If the desired Family is not of one of these, you can edit the Family prior to this process and temporarily change it to an applicable Category and then change
Solved: Generate Face Groups - Autodesk Community I'm really new to Meshmixer Generate Face Groups was working for me yesterday, but then stopped The object doesn't change colour and double clicking doesn't select the group of faces nbsp; I read a post where enabling basic rendering work, but this didn't make a difference to me nbsp;Another post suggested reinstalling the graphics card
Solved: Upside down lighting fixtures - Autodesk Community Place on face hosting will flip the fixture to the correct orientation in the Ceiling Plan Without using the reflected Ceiling Plan the best method is in an elevation view draw a reference plane from RIGHT to LEFT and name it and set the elevation