Downloads - CEE Hydrosystems CEE-LINE CONNECT 3 DOWNLOAD Connect to the CEE-LINE™ using RS232 or USB SYSTEM FIRMWARE CONTACT SUPPORT Contact us for system firmware Unit S N is required AUSTRALIA OFFICE CEE HydroSystems Unit 1, 12 Cecil Rd Hornsby, NSW 2077 Sydney, Australia NORTH AMERICA OFFICE CEE HydroSystems USA, Inc
CEE-LINE - CEE Hydrosystems Monitor and modify the operation of the CEE-LINE™ echo sounder on the fly with the CEE-LINE CONNECT utility Adjust bottom tracking and sonic characteristics, maximum depth and sound velocity for a resilient hydrographic solution
CEE_LINE_CONNECT_Software CEE_LINE_CONNECT_Software CEE_LINE_CONNECT_Software AUSTRALIA OFFICE CEE HydroSystems Unit 1, 12 Cecil Rd Hornsby, NSW 2077 Sydney, Australia NORTH AMERICA OFFICE CEE HydroSystems USA, Inc 701 Palomar Airport Road Suite 300 Carlsbad, CA 92011 USA RESOURCES MEDIA Knowledge Base Case Histories Brochures Videos
Knowledge Base - CEE Hydrosystems The CEE LINE™ is a “plug and play” solution for the Trimble TSC3 data collector With no Bluetooth or batteries to worry about, the echo sounder is powered and controlled entirely by the data collector The quick-start setup guide explains the process for using the CEE LINE™ within the Trimble Access environment
Products - CEE Hydrosystems The CEE-LINE™ is designed to interface with GNSS data collectors or PCs for easy data acquisition using land survey methods with GPS equipment from Trimble, Leica, Topcon, and Hemisphere Complement your CEE echo sounder with a CEETIDE MAX ™ tide gauge recorder, offering a precise and web connected solution based on radar water level sensors
www. ceehydrosystems manual intervention, CEE-LINE™ has powerful adaptive sonar algorithms Micro sized echo sounder for GNSS data collectors, bringing survey grade sonar performance to basic XYZ point acquisition methods Get total bottom coverage for maximum quality control, minimized latency and a clear view of the bottom Standard, narrow beam and dual frequency
Connecting the CEESCOPE CEE ECHO to Emlid Reach GNSS using Bluetooth There are three different methods for connecting the CEE-LINE to the Trimble TSC7: 1 “Smart” USB cable (see Figure 2) This has a USB Type A connector at one end and the CEE-LINE 12-pin LEMO connector at the other When this cable is used the CEE-LINE (and therefore the transducer too) is powered from the TSC7 battery via the Type A USB port
Without an understanding of a few key concepts . . . - CEE Hydrosystems Connecting to the CEE-LINE: The CEE-LINE echo sounder is configured using the CEE-LINE CONNECT software Often, this can be done once and left unaltered until surveying in a significantly different environment The USB cable generates a COM port on the connected PC, and the AUTO baud rate connect may be used to
CEE-LINE - CEE Hydrosystems The CEE-LINE™ is designed to operate with hand controllers using either a USB or COM port interface Simply plug the data power cable into the acquisition device and bring in the echo sounder depth data The CEE-LINE™ outputs several formats for trouble-free integration into GNSS continuous topo data recording No Battery Required