AM32 based mini ESCs - RCCrawler Forums You want this to match your motor KV size as much as possible This will bias the AM32 firm software to bias Maximum Accerlation, Ramp up Power, Low RPM throttle protection (like BL_Heli), which AM32 rolls into one setting
Bluejay or AM32 on Mark5 O3 : r fpv - Reddit I'd like to flash either AM32 or Bluejay to my Mark5 O3 but for the life of me I can't quite figure out how I learned that the blheli32 firmware is supposedly licensed to the manufacturer and locked
ESC Firmware Guide - Multirotor Guide AM32 supports features like firmware upgrades, various ESC protocols, bidirectional communication like the BHeli_32 and efficient motor startup It’s compatible with STM32 , GDS32 , AT32 family MCUs
AlkaMotors AM32-MultiRotor-ESC-firmware - GitHub AM32 has the following features: Firmware upgradable via betaflight passthrough, single wire serial or arduino; Servo PWM, Dshot(300, 600) motor protocol support; Bi-directional Dshot; KISS standard ESC telemetry; Variable PWM frequency; Sinusoidal startup mode, which is designed to get larger motors up to speed
ESC Configuration Settings | AM32 Stuck Rotor Protection: This setting is primarily designed for quads When the esc detects the motor is stuck it will 'give up' trying to turn the motor until the throttle returns to the neutral position This should be disabled in rock crawlers as the esc will give up when trying to get over a difficult obstacle
ESC firmware - Betaflight AM32 fully supports RPM filtering and EDT telemetry and is recommended for 32bit ESCs AM32 is a fully Open Source 32bit ESC firmware under active development AM32 is compatible with all major 32bit MCUs including SMT32F051, STM32G071, STM32L432, GD32E230, AT32F421, AT32F415 and AT32F4A