安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Elastic buckling analysis of rectangular longitudinally profiled (LP . . .
Longitudinally profiled (LP) steel plates are plates rolled to variable thickness along the rolling direction in order to suit practical loading distributions in construction applications
- 纵向变厚度 (LP)钢板轧制技术和受弯构件承载性能研究
变厚度轧制技术源于20世纪七八十年代日本川崎制铁的MAS平面外形控制方法 [1]，基于这一生产技术的纵向变厚度钢板 (longitudinally profiled steel plate，LP钢板)的生产始于1983年。
- The research and development of longitudinal profiled (LP) plate
Abstract: In this paper, the advantages of the longitudinal profiled(LP) steel plate is described, and the characteristics of LP plate rolling process is introduced In contrast to the ordinary steel plate, The change rule of the bite angle and other parameters is put forward from the rolling principle On this basis, the rolling plan is
- 纵向变厚度(LP)矩形 - cstam. org. cn
一般为截面高度变化,而对于钢板厚度变化较少。本文研究的纵向变厚度钢板(longitudinally profiled steel plate, LP 钢板) 是厚度沿轧制方向具有特殊形状的变厚度钢板[1]。它可以根据结构在不同极限状态下的受力模式,来确定其沿纵向的不同厚度尺寸,从而达到降低钢材用
- 纵向变厚度_LP_矩形钢板弹性屈曲系数的理论分析_徐冬冬 - 道客巴巴
因LP钢板几何形状的特殊性，其局部屈曲变形更容易发生在靠近薄端的位置，并且钢板局部稳定性能与相同受力状态下的等厚度钢板差异较大，需要进行深入研究。
- Plates | LP Steel Plate - JFE Steel Corporation
LP (Longitudinally Profiled) steel plate is plate with a thickness that varies in the longitudinal direction It is manufactured to order, so the plate thickness can be varied in accordance with the stresses applied to the particular structure
- Longitudinally profiled plates (LP-Plates) - Dillinger
Dillinger supplies LP plates in all structural steels up to and including S460 (minimum yield strength 460 MPa) in either as rolled or normalized delivery condition These tailor-made plates are available in the most diverse range of formats and assure an elegant, light weight and, above all, cost efficient solution
- Longitudinal profiled plate straightening process based on curvature . . .
Longitudinal profiled (LP) plate is a kind of plate with a variable cross section thickness along longitudinal direction, which is widely used in shipbuilding, bridge and building fields as stated by Liu et al [1], because of the advantages of saving steel and reducing structural weight
|
|
|