安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- 1910. 215 - Abrasive wheel machinery. | Occupational Safety . . .
Abrasive wheels shall be used only on machines provided with safety guards as defined in the following paragraphs of this section, except: Wheels used for internal work while within the work being ground; Mounted wheels, used in portable operations, 2 inches and smaller in diameter; and
- 29 CFR 1910. 212 -- General requirements for all machines.
§ 1910 212 General requirements for all machines (a) Machine guarding — (1) Types of guarding One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks
- OSHA Regulations for Machinery and Equipment
OSHA Regulations form the framework for Manufacturing Safety within the United States: Subpart O deals specifically with Machinery and Machine Guarding It defines the general requirements for all machinery (1910 212) Subpart I deals specifically with Personal Protective Equipment
- Metal Spinning and Regulatory Compliance
The FAA (Federal Aviation Administration) in the U S and EASA (European Union Aviation Safety Agency) in Europe set forth regulations that dictate everything from material specifications to post-delivery support, ensuring that every aircraft component is safe for flight
- AdvAnced SAfety StAndArdS reSourceS - SAE International
Driver-Vehicle Interaction SAE Standards Subscription (Online, SUB-STD-00010) The standards in this subscription cover measuring the driver’s field of vision, ITS in-vehicle message priority, advanced driver interface systems for commercial vehicle operations, discriminating backup alarm systems and more
- Machine safeguarding at the point of operation - Oregon
pedestal grinders create special safety problems due to the potential of the abrasive wheel shattering; exposed rotating wheel, flange, and spindle end; and a naturally occurring nip point that is created by the work rest
- eCFR :: 29 CFR 1926. 602 -- Material handling equipment.
All earthmoving equipment mentioned in this § 1926 602 (a) shall have a service braking system capable of stopping and holding the equipment fully loaded, as specified in Society of Automotive Engineers SAE-J237, Loader Dozer-1971, J236, Graders-1971, and J319b, Scrapers-1971
|
|
|