e621 4th May: We now have support for AV1 encoded videos inside MP4 files! For more technical information on accepted filetypes, see this wiki page
C13, C15, and C18 Engines Troubleshooting – E361(1) E361(2) E361(3 . . . C13, C15, and C18 Engines Troubleshooting – E361(1) E361(2) E361(3) Coolant Temperature Is High Use this procedure in order to troubleshoot high coolant temperature or use this procedure if one of the following event codes is active
SPN 110 - FMI 15 (Event Codes: High Engine Coolant Temperature Warning) Use this procedure to troubleshoot High Coolant Temperature or if one of the codes is active E361 (3) = Engine Coolant Temperature High - Most Severe (3) The Engine Coolant Temperature has exceeded the trip point and the delay time has expired Engine power is derated The code is logged
Table 1. E361 High Engine Coolant Temperature Event Code Continued. E361 High Engine Coolant Inspect coolant for dirt and other Coolant Dirty or Contaminated Temperature - Warning, particulate contamination Flush cooling system (WP 0256) Derate, or Shutdown Proceed to Test Step 8 Continued Aftercooler Restricted Clear Test Step 3 Inspect Aftercooler restrictions (WP 0230)
C7. 1 Engines and Generator Sets Event Codes Caterpillar Event codes are generated when abnormal operating conditions exist A further explanation of event codes and the engine monitoring system is described after Table 2 Table 1 is a list of the event codes for the engine The event codes are listed in order of J1939 codes
E361-3 High Engine Coolant Temperature - Heavy Equipment Forums E361-3 High Engine Coolant Temperature Engine Temp is 176 F (See attached Picture) - Thought the temperature needed to be 230F for it to throw a code Radiator should be clean, just power washed it and installed in Cat Coolant when we replaced Turbo