Anything good on a 78 fairmont? | FordSix Performance Forum Its in a u pull yard Its cold here now which makes it a PITA to pull stuff I found another car with a 200 today when I went back for other stuff, dont remember what it was but it looked newer and it was not a car that I had ever seen a 6 in before
nascar rear suspension | The H. A. M. B. - The Jalopy Journal I scored a pair at the local u-pull it only 25$ Used the crossmember as a the trans mount,used airbags instead of coil springs,stock shock mounts and a panhard bar Works and rides great
1996 obd2 4. 9 turbo tuning set up info | FordSix Performance Forum I have a few old ford trucks all 67-72 body Im looking to do an EFI Turbo 300 with a ZF5spd in my 69 250 I started gathering things ill need, i already bought an obd2 mass air efi set up from a u pull r parts
All Small Six Distributor guidance ideas - fordsix. com Current distributor is a u pull it large cap with silver box on fender and round coil from a big 6 pickup It was running really good before car got parked for years and water got into block Removed head and cleaned lower end and added some mods and changes to intake
fairmont wagon | Page 2 | FordSix Performance Forum i called a friend today he did a v8 converion ina fairmont wagon a few years back anyway he has a 7 5 rear with 3 27 trac-loc rear he said i can have it for 75 bucks he use to go to a cool u pull it yard about 1 hr away he cut turbos of t birds and sell them and other thing like 8 8 rears see this is a cool place rears were 40 buck and for
All Small Six - Clutch and flywheel | FordSix Performance Forum For a stock 1963 Falcon Econoline there was only one choice for the Flywheel they came with a Stepped also often referred to as a 'Dog Dish" these are a 132 tooth and had an 8 1 2 inch Clutch Assembly, used on all the early engines the 1960 to 1965 144, 170 and 200 Small Six's as well as the 1966 ford Mustangs with a 200 Six