安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- LLDP Avaya 9600 Series Phones - Cisco Community
I did find several cases for LLDP not working between the avaya phones on 3750 switches, Most of them were closed referencing avaya support So, here's my questions: Can we look at the wireshark capture are there any messages on the phones? in the logs, or display? What happens when you: factory default the switch, set the voice vlan to 10
- Avaya IP Office SIP Trunk Configuration Guide - Cisco Community
SIP Server is the address of the Avaya IP Office, “192 168 97 60”, and the Register box is not checked SIP Server Port is the port number on which the Avaya IP Office SIP server is listening for SIP data SIP Port is the port number on which the Valcom device is listening for SIP data By default, both SIP ports are set to “5060”
- Solved: Avaya IP Phones block PC from getting authenticated and . . .
Hi All, We are currently migrating users from NAC to ISE and experienced an issue with Avaya IP Phones The Avaya IP phones is configured to be automatically profiled and allowed in VOICE domain using MAB while the PC gets authenticated by the ISE using 802 1x On the PC, we use AnyConnect ISE Pos
- Avaya IPT - LLDP DHCP issues - Cisco Community
I've seen that before at a client, and here's what Avaya said: 96xx IP phones use scope option 242 If you only have 176 defined, the 96xx IP Phone will display "Waiting for LLDP" because the DHCP server is not telling the phone where to connect
- Solved: CUCM -AVAYA Integration - Cisco Community
Also enable options ping on CUCM SIP trunk for the avaya SM ip address You can do a trace from CUCM to avaya side because ping is sometime disabled on some devices in network You can do a packet capture on CUCM to see what messages are you receiving from avaya but first you need to make sure you atleast have connectivity Thanks
- Avaya phones with Cisco switches
We are trying to install a group of Avaya phones in our network (Cisco network) but I have a doubt about the configuration, actually we have next configs in each switch: default-gateway is the router of our LAN Data (10 6 140 1) VLAN data is number 2 VLAN voice (defined in each switch now) is num
- Cisco Avaya Integration
Or, if the Avaya isn't SIP, then you can terminate a Qsig trunk on a Cisco GW which then communicates with CUCM via whatever IP protocol you want to use Of course, other than the trunk you use, you need to set up the dial-plans on the Cisco side and the Avaya side so that each knows what calls to route to each other
- QoS settings for Avaya phones
Indeed Avaya phones do not use CDP You have three options with Avaya phones and Cisco switches 1 configure trunks like you mentioned 2 use LLDP 3 configuire port for switch access vlan and voice vlan and have the Avaya phones learn the voice vlan number from option 242 (for 96xx and 16xx phones) or option 176 (for 46xx series phones)
|
|
|