安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Forum list | CJ-8
CJ-8 History Production Questions and topics related to the how CJ-8 Scramblers were originally equiped, production information, etc
- Holley Sniper EFI install on my 258 - CJ-8
I intended to take a bunch of pictures and make sure I document my experience installing the Sniper on my Scrambler I probably did not get enough pictures or take enough botes, but here goes To start off, I replaced a Holley 4bbl carb mounted on an Offenhauser intake Is it more carb than
- What is the best lift kit with the softest ride? - CJ-8
Just bought a 1983 Scrambler and doing some restoration to it I want to get 35's on it but need to add a lift kit I have been told that Skyjacker has the best ride but also should look at Old Man Emu Need some experienced Scramblers with some advice on these lift kits with the softest ride
- No fuel, wont start without priming - CJ-8
OK, last week had a rough night and ended up blowing the fusible link that comes off the solenoid Killed the whole Jeep Went back the next morning and fixed that, and when Jeep fired up I noticed my fuel lines were cracked coming off the filter (stock 1 inlet, 2 outlet) I put new fuel
- Warn AMC 20 Rear Full Float Axle - Installation Instructions - CJ-8
Scan of provided installation instructions Credit Warn Industries, Inc
- Best Engine Swap? - CJ-8
Toying with the idea of keeping the Scrambler (wife has already agreed) but this will definitely require performing an engine swap to make it long distance at 65 mph and partly to satisfy my need to tinker :D Was considering dropping in a 4 0 fuel injection engine with an automatic
- Full Hard Top Latches Needed--Found Them. UPDATED With Photos - CJ-8
I picked up an ACME brand hard top over the weekend It is misssing two of the latches on the driver's side Does anyone here have any extras I can get or know where I can find good replacements :cheers:
- Muncie SM420 or New Process NP435 - CJ-8
I used a ford version T18 in my cj-7 It bolts to the stock bellhousing, uses stock pressure plate and flywheel, ford disc, and an advance adapter plate on the rear for the t case to bolt to The adapter aint too much (cant remember now) and you can find these trannies in the junk yard easy enough
|
|
|