安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- 8. 3. 6 Check Your Understanding – DHCPv6 Answers - ITExamAnswers
Explanation: A DHCPv6 client sends a DHCPv6 SOLICIT message to the reserved IPv6 multicast all-DHCPv6-servers address of ff02::1:2 3 What DHCPv6 message does a host send to the DHCPv6 server if it is using stateful DHCPv6?
- 8. 5. 1 Lab – Configure DHCPv6 (Answers) - ITExamAnswers
b Assign the DHCPv6 pool you just created to interface g0 0 0 on R1 R1(config)# interface g0 0 0 R1(config-if)# ipv6 dhcp server R2-STATEFUL Part 5: Configure and verify DHCPv6 relay on R2 In Part 5, you will configure and verify DHCPv6 relay on R2, allowing PC-B to receive an IPv6 Address
- 8. 5. 3 Module Quiz – SLAAC and DHCPv6 (Answers) - ITExamAnswers
Host sends a DHCPv6 SOLICIT message The client, now a DHCPv6 client, needs to locate a DHCPv6 server and sends a DHCPv6 SOLICIT message to the reserved IPv6 multicast all-DHCPv6-servers address of ff02::1:2 I think that the quiz has the wrong answer
- 8. 4. 9 Check Your Understanding – Configure DHCPv6 Server Answers
5 An IPv6-enabled router is to acquire its IPv6 GUA from a DHCPv6 server Which interface configuration command should be configured on client router? ipv6 address autoconfig; ipv6 address auto config; ipv6 address dhcp; ipv6 address dhcpv6
- CCNA 2 v7. 0 Curriculum: Module 8 – SLAAC and DHCPv6 - ITExamAnswers
DHCPv6 Server – Router provides stateless or stateful DHCPv6 services DHCPv6 Client – Router interface acquires an IPv6 IP configuration from a DHCPv6 server DHCPv6 Relay Agent – Router provides DHCPv6 forwarding services when the client and the server are located on different networks 8 4 2 Configure a Stateless DHCPv6 Server
- 8. 2. 3. 5 Lab - Configuring Stateless and Stateful DHCPv6 Answers
e Set the DHCPv6 network discovery (ND) other-config-flag R1(config-if)# ipv6 nd other-config-flag R1(config-if)# end Step 2: Verify DHCPv6 settings on interface G0 1 on R1 Use the show ipv6 interface g0 1 command to verify that the interface is now part of the IPv6 multicast all-DHCPv6-servers group (FF02::1:2)
- Routing and Switching Essentials 6. 0 Instructor Materials - ITExamAnswers
DHCPv6 server responds with a DHCPv6 ADVERTISE unicast message Stateless DHCPv6 client – Generates its own address Sends a DHCPv6 INFORMATION-REQUEST to the DHCPv6 server requesting only configuration parameters Stateful DHCPv6 client – Sends a DHCPv6 REQUEST message to server for an IPv6 address and all other configuration parameters
- A network administrator has configured a router for stateless DHCPv6 . . .
IT Questions Bank › Category: CCNA › A network administrator has configured a router for stateless DHCPv6 operation However, users report that workstations are not receiving DNS server information Which two router configuration lines should be verified to ensure that stateless DHCPv6 service is properly configured? (Choose two )
|
|
|