安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Home Made Pan Degreaser - Bushcraft USA Forums
WD-40 and Coca-Cola — This Actually Works Watch on You must log in or register to reply here
- MacGyver Tips of the day | Page 2 | Bushcraft USA Forums
MacGyver tips in the Kitchen People that are diabetic or have problems with their glucose levels or carbs, most have gone away with things like pasta There is a company called Fiber Gourmet that has 1 2 the calories of other pastas and although it may have the same amount of carbs, it has approximately 12 times the fiber, at 86% of your daily fiber intake The high fiber means the glucose
- Knife Gallery -- Pics | Page 1360 | Bushcraft USA Forums
Random orbital sander and WD-40 On the machete I used 60-120-220-worn 60 This one was just a worn 120 It's based on a trick I learned from Mike Irie a million years ago He calls it a pewter finish and he uses a worn scotchbrite belt and WD-40 Makes it super easy to touch up wear and tear This finish might open me up to more potential rust so this is the test
- Knife Gallery -- Pics | Page 1358 | Bushcraft USA Forums
Random orbital sander and WD-40 On the machete I used 60-120-220-worn 60 This one was just a worn 120 It's based on a trick I learned from Mike Irie a million years ago He calls it a pewter finish and he uses a worn scotchbrite belt and WD-40 Makes it super easy to touch up wear and tear This finish might open me up to more potential rust so this is the test
- Puuko 200 handle issue - Bushcraft USA Forums
Recently purchased this knife here As i had already seen and read about the handle fit at the riccaso isn't tight which appears to be an access point for moisture Any ideas on the best method to fill this void I had considered spraying a few squirts of wd-40 but I'm concerned about
- Ballistol good or bad - Bushcraft USA Forums
I used to think so too but at least in my experience, Ballistol doesn't gum up over time like WD-40 can and at least half of the cans of WD-40 I have bought stop spraying when they are still half full so half of it is wasted
- Drill Bits - Bushcraft USA Forums
A question tothe machinist and metal workers out there from a novis: are titanium nitride drill bits garbage or am I using (read abusing) these things wrong They seem to dull rather quickley and snap frequently while mounted in a drill press set at the slowest speed I have used cutting oil
- The Esbit stove thread (mods and in use) - Bushcraft USA Forums
Watch on Click to expand hello, @bacpacjac I was thinking of customising the East German NVA kocher stove into a small twig or *charcoal burner, as it has a broad base no holes etc WD-40 loob was used to clean the 27 years of Cold War storage dust from the stove Regards David Kocher demo pronunciation (German)
|
|
|