安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Lightest Dinghy for 2 adults? | Sailing Anarchy Forums
Looking for a lightweight dinghy with hard hull (i e not a Snark or an inflatable) that will carry 2 adults (say 300 lbs max) I don’t race, so ease of setup is more important than speed, size of class, etc Need it to be light for when I’m sailing solo and have to roll it up a steep ramp Laser, Sunfish, etc all about 130 lbs Rocket is 90
- Dinghy Anarchy - Sailing Anarchy Forums
dinghy day sailing--what tools parts do you bring? Sásamh; May 29, 2025; Replies 16 Views 443 Monday
- Einsteins Dinghy - Sailing Anarchy Forums
The International 12-Foot Dinghy - Small Boats Magazine In 1913, shortly before the start of WWI, England’s Boat Racing Association (BRA), a small club of sailing enthusiasts, called for a design to comply with the following requirements: length 12′, beam 4′8″, and a single 100-sq-ft sail with no battens; she should be a capable rowing
- Measuring Dinghy Speeds - Sailing Anarchy Forums
well if your out on a yacht anytime in your area, take note of distances between certain buoys or marks on their gps then when your out on your dinghy you can sail point to point and record the time it took you, ie 1mile in ten minutes is 6mph, all gets complicated when you cover 355 of a mile in 2 32 minutes but hey if your gonna be cheap
- Tactical compass recommendations for a dinghy
I would like to buy a new tactical compass for a dinghy Other than their sensitivity to angle-of-heal, I have heard good things about the Suunto K-16TAC Unfortunately, I can't find one for sale View attachment 234057 The Ritchie X-Port Tactician (XP-98W) looks like a decent option
- Foldable dinghy. | Sailing Anarchy Forums
Well I'm looking at a "Foldable Boat" for a dingy I live aboard, at anchor I planned on cruising the Bahamas and points south Not really interested in a deflatable I have a 3 3hp motor I'm hoping to get one that holds the motor, rows well and even sails
- Spars and sails for homemade dinghy | Sailing Anarchy Forums
Use an aluminum mast section from a production dinghy that has been scrapped Build a hollow mast out of 1x (finished size 75") planks in select clear pine using bird's eye joints Glue up four pieces of 1x planks and cut down to 2" diameter (Three would be thick enough but would tend to warp I would think) The sprit is less critical
- Approaching a mooring with a dinghy on it - Sailing Anarchy Forums
The dinghy adds a large PITA factor because it stretches the mooring line out and isn't always lined up right, depending on wind and current Sometimes I end up with the mooring line going under the bow to the dinghy
|
|
|