安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Diskette drive 0 seek failure - Dell
The problem of Diskette drive 0 seek failure is when the diskette drive gets enabled in BIOS You need to go to the BIOS by tapping F2 on boot up and then disable the option Please take a look at the picture: You need to select Drive A and make it [None] Please reply with anymore queries Thanks and Regards DELL_Priyanka_S Dell Social Media
- how to install operate USB floppy diskette driver
how do I operate Portable USB Floppy Diskette Drive on Windows 10 I can install the drive but when I try to operate it with the floppy disk in portable diskette drive it does not operate and informs me "insert disk into drive"? Isleofcantie [Moved from Mobile Devices]
- 02B0: Diskette Drive A error - Dell
For this, what you can do is, Check to see that the drive is defined with the proper diskette type in Setup and that the diskette drive is attached correctly If everything is fine, you should be having a CD called Dell Dimension Resource CD from which you can run a Diagnostic Test on the Floppy drive to test it's integrity
- Diskette Drive 0 Seek Failure - Dell
This Problem occured today June 12 2009, I got on it this afternoon and everything was fine I got on line and about 10 mins later it started lagging and having a hard time So i turn it off (using the button on the tower) and re-started it It got to the loading screen and right after that it said "Diskette Drive 0 seek failure"
- usb portable diskette drive - Microsoft Community
As per the description, I understand that you have Windows 10 and want to install USB portable diskette drive on the system I certainly understand your concern and will try my best to help you I would suggest you to refer to the following Microsoft Help article given below and check if that helps Install or remove a hard disk drive
- Diskette drive 0 seeks failure - Dell
In the System Setup, have you scrolled down to 'Diskette Drive" and see if it's set to 'Off' [disabled] See HERE 1 Onboard or USB Floppy Drive (Not Present) Means there's no internal, or USB external Floppy drive installed 2 Onboard Sata Hard Drive (Not Present) Probably means there's no second SATA hard drive installed 3
- Diskette drive 0 seek failure - Microsoft Community
When I turn my computer on, I get a message: Diskette drive 0 seek failure Press F1 to continue, F2 to enter SETUP I press F1 and it starts OK, but how can I set it up to avoid this?
- diskette drive 0 seek failure - Microsoft Community
I suddenly started getting a diskette drive 0 seek failure message I went into the BIOS and made sure that there was no drive A slelected and also went into the IDE Interface and disabled it When I restart, I no longer get the diskette drive 0 seek failure, but the computer still will not boot up
|
|
|