安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Oldsmobile Buick aluminum 215 V-8 | The H. A. M. B. - The Jalopy Journal
"From 1961 to 1963 Oldsmobile manufactured its own version of the Buick-designed, all-aluminum 215 engine for the F-85 compact, known as the Rockette This was a compact, lightweight engine with a dry weight of only 350 lb (159 kg)
- Buick 215 | The H. A. M. B. - The Jalopy Journal
The aluminum 215 was built by Buick from 61-63, and Olds had a similar but slightly different version of the same engine The engine went to an iron block with a "modern" bellhousing in 1964, and increased in cubes to 300, then 340
- Buick 215 v-8 | Page 2 | The H. A. M. B. - The Jalopy Journal
The Buick 215 has 4 bolts combustion chamber and the Olds has 5 The Olds was the base for the Repco Formula 1 engine with which Jack Brabham won World Championship in 1965 It was epoxy filled in the lower part of the waterjacket F-85 Olds is the "bomb" ran a 4 bbl Jim
- Projects - 215 Buick Olds | The H. A. M. B. - The Jalopy Journal
Projects 215 Buick Olds Don't know about the weight factor or lack of it that would be problematic
- Projects - Buick 215 Aluminum | The H. A. M. B. - The Jalopy Journal
The real advantage to the Buick Olds 215 is the weight That 305 lbs makes the A front end handle like a dream I love the engine and have built several of them, blown and carbed, but it will be $$$$$ D D Fabrication make a bellhousing to mount the T5 or any other Chev flanged trany behind them
- Technical - 215 Buick engine? | The H. A. M. B. - The Jalopy Journal
Check rotation on boat engine,if single engine boat should be same as car But if duel engine boat one will be counter rotation Olds 215 engine is better than Buick 215 , but easier to get Buick parts as engine stayed in production much longer Used in UK well into the 1990's
- Technical Buick 215 Mild Warm Over Thoughts? - The Jalopy Journal
The Buick V-6 basic design came right off of the 215 drawing board I've ported a few V-6 heads, both the street head and the stage one head That said, and as you may well know, that ANY cylinder head cast before about 2000 can well use some careful rework in the intake ports and at least some touch-up work in the exhaust ports
- Hot Rodding a Buick 215 | The H. A. M. B. - The Jalopy Journal
Who makes the 3 pot for the 215? Edelbrock makes a four barrel and Offy makes a two pot Never seen a three pot The Oldsmobile Pontiac 215 and the Buick 215 are not the same Big difference is the heads To support turbo charging the Oldsmobile Pontiac block and heads have five head bolts per cylinder The Buicks have four
|
|
|