安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- fliplines, what are there uses? - Arborist, Chainsaw Tree Work Forum
Flipline refers to the technique used to ascend vertically where you "flip" the rope, then step up in your spurs A lanyard is a short length of rope used to secure something of value such as a chainsaw to your harness
- What flipline? Need advice. - Arborist, Chainsaw Tree Work Forum
Flipline Steel core fliplines are heavier than you might think One 1 2 " used as a backup when cutting will suffice I have enough gear strapped on when moving about and climbing to consider hauling two steel cores up a tree
- Flipline: with wire core or not? | Arborist, Chainsaw Tree Work Forum
I'm climbing a cottonwood for removal with spikes and flipline (non-wire-core) I'm chunking down wood in record time and working about 35' off the ground I go to adjust my flipline after a routine cut and notice that only one tiny strand of material is all that's holding me after I apparently knicked the line with my 14" bar on the notch cut
- Lanyard vs. Flipline? | Arborist, Chainsaw Tree Work Forum
Flipline, Lanyard, Butt Strap, Buck Strap, Sissy Strap, All the same thing This is an essential piece of gear for any type of treeclimbing, spikes or otherwise Learn to footlock and you'll be at the top of the tree while xtremelystupid is putting his spikes on
- Fliplines. . Steel vs Rope | Arborist, Chainsaw Tree Work Forum
When chunking down a spar, yes, I always have a choked lifeline, with flipline a bit lower On the way up a removal, I'll usually set an overhead lifeline, not always though If not, it'll be set similarly to my flipline By the way, maybe not an 020, but I gaurantee you my 335 could decimate a steelcore flip line in a fraction of a second
- KlimAir two way or Gibbs Petzle one way flipline adjusters
wirecore 2-way I have a double ended [two snaps] 5 8 16' wirecore flipline and a wirecore prussik on a swivel I can use both ends at once, clip, unclip and do short rappels with it Good cut protection It's sold at Pacific Arborist supplies and It works great for me
- Gibbs Klimair Flipline Adjuster - Arborist, Chainsaw Tree Work Forum
Better off with a trango cinch and 10mm flipline 15' with ISC biner snap on the end -- awesome combo once
- 2 Questions on Fliplines | Arborist, Chainsaw Tree Work Forum
But your flipline is life itself up in a tree I went over to 11 mm 'rope' line (Blaze, currently) I like the handling characteristics of the 11 mm, but I trade a certain level of full-on, bombproof security
|
|
|