安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- APEX FMM Configuration | Reef2Reef
Hello, I bought an Apex 3 second hand and I thought I had reset it to factory settings but I'm wondering now if there are still items showing that arent valid? I have one FMM module plugged in for my ATK with ports showing as ATOLO, ATOHI for the optical sensors and then the optical sensor
- Neptune FMM module issues | Reef2Reef
So I have the FMM module that cam with the ATK kit I have the two optical sensors that came with the ATK, One 15 inche LLS, and one Leak Detection Over the weekend this module would show as missing and not sure why Unplugging it reset everything and started working again Now the issue I
- Trouble with APEX FMM | Reef2Reef
I recently updated my old Apex classic to the new in hopes of eventually getting a trident I also added a FMM as I wanted to add an extra layer of protection on my ATO with optical sensor and get a leak detector and flow sensors When it all works its great but I have been having the FMM
- Neptune Apex Programming Tutorials, Part 3: Automatic Top-Off Kit (ATK)
Part 3 of our series on learning how to program your Neptune Apex for automatic top-off in a saltwater aquarium
- Apex controller FMM ports | Reef2Reef
Oh, I didn't realize the Apex 3 has built in FMM ports So it sounds like you went to the Modules screen and clicked on the FMM_X module and in the configure dropdown, selected Delete?
- Neptune Apex Programming Tutorials, Part 3: Automatic Top-Off Kit (ATK)
Let’s walk through each line: Fallback OFF — instructs the Apex to turn off this output if the Apex ever gets disconnected from the FMM This could also apply if the Apex locks up and becomes unresponsive (which rarely happens) This just basically means don’t run the program if the Apex unit isn’t in control of the situation
- FMM disconnected | Reef2Reef
My FMM is showing disconnected and the optical sensors are not responding to state changes thus my ATO is not currently working I have disconnected both USBs into my FMM so the light turns out, wait approximately 30 seconds and replug in The light is showing green but it is still showing disconnected on Fusion Any suggestions?
- Apex A3 Pro FMM Issues. . . | Reef2Reef
Since the FMM is built into the A3 Pro, I cannot unplug it or reset it with a paper clip as one could if it were a separate box I tried "deleting" the FMM from my configuration but when I re-added it, the port configuration was retained How do I reset this built-in FMM so I can set up the ports again?
|
|
|