安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Front suspension service and parts - Kaiser Willys
Looking further at the Jeep Universal Parts List Group 27-03 and KW, it shows (1) A1097 U bolt to be installed on the passenger side, (2) A1097 on the drivers side The PO had one over the smaller flanged end of the Dana 27 where it's welded mated to axle shaft tube, I assumed 2 per side but now seeing that is not correct, so I will revert back to what the factory calls for
- 46 CJ2A Parts Runner - willysjeepforum. kaiserwillys. com
The Jeep had one of the best road manners of all the Jeeps that I have been around, so I didn't want to mess too much with the steering After marking the dimensions of the front frame, and placing some plumb bobs and mark the floor to keep everything in check
- 1960 Willys Truck 6-230 [Archive] - Willys Jeep Forum - KaiserWillys. com
I am the proud owner of a 1960 Willys Truck that was built in Australia by Willys Australia For its age this truck is in exceptional condition, fitted with an overdrive and has very little rust 104 Picked up my project from Windsor in New South Wales and towed it back to my property in South Australia 105 It is fitted with an overhead cam Tornado 230 engine which turns over freely on the
- Quick Tour of a Filipino Willys Jeep factory. Also to note parts . . .
Since I am here and the Jeep (copy) scene is still fairly popular I thought I'd share this video a friend made when we went out to MD Juan (Manila) the other week I ordered a new set of front springs for my M38 copy So we turned up with a couple of WW2 re-enactor friends and some old military guys for a day at the factory
- 46 CJ2A Parts Runner - Page 17 - Kaiser Willys
This is our CJ2A that has been within the family since the early eighties When purchased, the engine was crude oil pump more than it was an internal combustion engine
- Help determining if my jeep willys is a Filipino copy or an original . . .
Hi Guys, I bought what looks like a Jeep Wills that has been converted to run on Toyota (Delta Motors) parts in The Philippines (PH) When I bought it I was told the previous owner (who is a very old guy who owns four medium sized office buildings in the main city) imported the shell and had the chassis and drivechain made here
- Willys Jeeps - General Discussion [Archive] - Willys Jeep Forum . . .
Hood for 55 jeep willys truck; Value of a Willys tub? new 46 wiilys truck; Willys Truck Bed for 55; Believe i Found old willys jeep; New to this site,but not to vintage jeeps! Half cabs? M38 questions on 1951 early M38 s n 24707 on dash plate Good find 1940 Willys Jeep? Is this heard of? Another good find! where were Willys built Is this a
- L6-161 L -head flathead 6 paint color - Kaiser Willys
Also, many Willys vehicles have undergone modification over the years Worn and broken parts have often been replaced with parts from Willys vehicles from different years You could never put a door from a 1957 Chevy on a 1960 Chevy, but a door from a 1950 Willys pickup can go onto a 1960 Willys wagon with no problems
|
|
|