安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Planking Tips For Building a Model Ship - Modelers Central
In purely theoretical terms, if the measurement at frame No 3 is (say) 80mm and at frame No 5 it is (say) 120mm then each plank needs to be narrowed down to 2 3 (80 120) of its full width at frame No 3
- OPTIONAL PLANK-ON-FRAME TECHNIQUE - ModelShipBuilder
6 Draw a centerline down the center of the Masonite Then mark the exact location of each frame 7 Now mark the width of each frame, which will coincide with the width of the frame shown at the top of the second reference line on each frame Make these into notches that will be cut into the Masonite at these points Repeat this for all the
- Plank on Frame Build with a Plug Mould - Model Ship World™
It will work - in theory In order to have an accurate hull form, it means assembling the frames on the plug This means that the inner surfaces of the frames would need to be accurately pre-bevelled and faired in order to fit the plug properly
- Model Ship Master: Plank on frame construction
Plank-on-frame hulls are much more time-consuming than solid hull carving but model ship experts still use it because it is the foundation of a great model The Ship Model Classification Guidelines of the Mystic Seaport Museum in Mystic, Connecticut is specifically against solid hull for large ships
- How to Build a Wooden Boat — Plank-On-Frame Lobster Boat . . .
Get Part 2 and more of this ongoing series here: https: www offcenterharbor com lobster-boat-yt Off Center Harbor has several comprehensive wooden boatbuil
- Model Boat Hull Design - Construction Methods and Hull Types
Probably the most often confused model boat hull designs are Plank-on-frame and Plank-on-bulkhead - strictly speaking, they are not the same thing Plank-on-frame mimics the way a full-size ship was built, from the way the frames are constructed, to the width and joints of each strip as it is planked
- Planking: An Introduction to Methods Techniques
Strip-building, a variant of strip-planking, is also an excellent choice for the first-time builder, often used to build kayaks, canoes, and other small boats One by one, strips are glued next to one another on the building jig and then temporarily stapled to the molds
- Model Boat Building for Beginners - Building Model Boats
3 Book or magazine (on-line) suggestions for "learning model boat building" 4 Size of material (balsa) for model boat frame (my first model is desired to be 12" long, 3" wide and 4" deep) 5 Type of glue, basic tools needed to get started (I have already purchased a Model Vice and a cutting board for template making)
|
|
|