安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- HTTP API Remote Open Door fails with Basic Authentication Error
The “Enable HTTP API Remote Open Door” setting is correctly set to “Basic Authentication”, but I cannot get the remote open to work What am I doing wrong? I would like to avoid the complexity of the MD5 challenge response interaction if possible, and I had hoped this simple, url-based approach would do the trick Thanks, Rick GS_Guy 2022-08-12 04:08:31 UTC #2
- Gmail use - UCM62xx UCM6510 IP PBX Appliance - grandstream
On May 30 google will stop allowing the use of “less secure” apps for email Is there a Grandstream solution planned? I was trying to switch over to use a COMCAST account, but I was unable to get those settings to work
- Telco Call Forwarding Question - IP PBXs - grandstream
I am working on an install for a two location business, using 2 - 6102’s, one at each location with 2 analog phone lines, and a sip trunk at each, prioritizing the outgoing calls via SIP in general, and incoming on the copper lines… When not in the office or when away, phones are forwarded (*72) to an answering service It seems to me that within the system the *72 *73 refers to the
- DP720 Ringtone does not save NEED HELP - forums. grandstream. com
Hello World I have a simple setup GS DP750 with one GS DP720 handset paired The 750 is registered to a sip server When I place a call to the 720, the 720 plays the “ringback” tone as the ring tone I try to change the settings on the 720 to ringtone 1, 2, 3 etc… but the ringback tone always plays I went into the GUI on the 750, changed the system cadence to 500 500 and it worked for
- UCM new firmware - IP PBXs - grandstream
Anyone faced issues and bugs after the upgrade to the latest firmware version 1 0 20 17 on the UCM6510??? Locally Transfer issues Active calls status Status of Grandstream gateway on the UCM6510
- Problem with Registration - forums5. grandstream. com
Same problem here Grandstream DP750 with a single DP720 keeps losing Registration to FreePBX 14 0 1 14 with Asterisk 13 17 0 A reboot resolves the issue Our receptionist has to reboot the DP750 every morning so the wireless handset will work Tried changing the transport from UDP to TCP, no difference FreePBX extension is PJSIP
- Interconnection between UCM 6100 - DIAL BY NAME
The assumption is we are maintaining two systems with two sets of extensions on for San Francisco and one for Denver Is an unified “dial by name” possible in this scenario? thx, -marc primethios 2015-02-08 19:09:58 UTC #2
- Webrtc using puplic ip not hear - IP PBXs - grandstream
Hello everyone I have use UCM6202 firmware 1 0 19 27 when I call using webrtc using public ip it has no voice I using google chome Version 77 0 3865 90 (Official Version) (64 bit) and the latest firefox but it’s the same Is that a problem of UCM Thankscapture-000B82E4EC41 zip (3 6 MB)
|
|
|