安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- How do I change DSC 1616, 1832, or 1864 delay times? - AlarmSystemStore. com
The system has 3 timers that you can set: entry delay 1, entry delay 2, and exit delay The entry delays need to be between 30 seconds and 255 seconds The exit delay must be between 45 seconds and 255 seconds
- How to Edit Arming Delay on DSC Power Series Alarm System
In this video I will explain you how to edit your arming delay on your DSC Power Series Alarm System If you want to change your entry delay or your exit dela
- Changing DSC Alarm System Entry and Exit Delays
To adjust DSC alarm system entry and exit delays: *8 (installer code) type in 005 for section 5 then 01 for partition 1 then 001 for entry then 001 for exit Then ## to exit 1 minute is the lowest delay
- Changing exit delay on dsc 1555 - DoItYourself. com
My installer left the exit delay @ 120 seconds when they programmed my alarm and I want to change it to 30 seconds I tried the the following keystrokes but the time did not change: *8 (Installer's Code) 005 120 030 # until I get out of programming
- Exit Delay Time Restart - PowerSeries Neo - Panel - DSC
The control panel has an option to restart the exit delay timer when the entry exit zone is tripped twice prior to the end of the exit delay The exit delay timer can only be restarted once
- Any DSC experts? Adding Exit Entry delay on a zone
Search for the installation and programming manual for your panel You need to change that zone type from perimeter to entry exit You should be able to easily find that in the manual, I don't do enough DSC to be able to tell you exactly which field that is in
- DSC - Distinguish Between Away and Stay Exit Delay In Progress
I have a DSC panel with IT-100 and the HS DSC plugin The DSC panel is configured so that it also has a delay when it is put into Stay mode So when I press the Away button on the DSC keypad the "LCD Update" virtual device (created by the HS DSC plugin) has a status of "Exiit Delay in Progress"
- How do I change the entry and exit delays on the DSC NEO?
The NEO can have 2 entry delay times and 1 exit delay With the CP01 standards for false alarm reductions, the entry delays can not be lower than 30 seconds while the exit delay has to be 45 seconds or longer The system cannot go higher than 255 seconds for any delay Use the following steps to program the delay times *8-installer code
|
|
|