安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Options for improving TR650 forks. . . . - Cafe Husky
The lowers wouldn't swap between a 46 and 48, but they are a cheap, readily available fork on the used market, and are very adjustable The wheel options would be pretty much, cast 17s or anything you can spoke to a YZ, Husky, Honda, etc, front rim
- TE TC - TE 300 vs TX 300 | Cafe Husky
Can anyone comment, honestly (having rode the two), on power delivery difference with semi close ratio gears on TX vs the TE? Is there any difference, if so please enlighten me?! PS: I'm aware of the difference between wide ratio vs semi close Thanks Tommy
- 2 Stroke | Cafe Husky
1989 newer 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014 WR = 2st Enduro CR = 2st Cross
- FE FC - Gearing on the 501 FE | Cafe Husky
The oem 13 50 is too tall for my taste in the open desert and Baja, so I went to my trusty web site, Gearing Commander No Husky 501 FE, so I entered the info and within a week they checked my info and emailed me to let me the bike was verified and added to the data base If you have never
- FE FC - FE501 valve clearance adjustment. | Cafe Husky
Good morning everybody I would like to add this post and ask if anybody has had a similar experience? Or can relate I just did a valve clearance check and adjustment on my '15 FE 501 Husky on this past Sunday The valve clearance on it is supposed to be 10mm to 15mm on the Intakes and is
- 1987 430 Enduro Cycle World Road Test | Cafe Husky
I noticed that says enduro on the swingarm and they post the 5 speed in the statistics Did people actually pay that price I got the origional reciept with my 88te510 and it was in the high 2000's would have to look to be sure What about the speedometer comment? I see the speedometer in the parts sheet as for the european models Odometer in USA? Did It really have a speedometer for the 430
- Vintage Left Kickers | Cafe Husky
1988 older Hi everyone, As you all know, Coffee (Dean) passed away a couple of years ago I am Dean's ex-wife's husband and happen to have spent my career in tech Over the years, I occasionally helped Dean with various tech issues When he passed, I worked with his kids to gather the necessary credentials to keep this site running Since then (and for however long they worked with Coffee
- Help needed with kick start spring installation | Cafe Husky
For some reason I had the brilliant notion that I needed to disassemble the kick start mechanism to advance the shaft My goal is to have the lever engage earlier – right now it engages at 3 o'clock I believe all I needed to do was take the lever off and move it up one spline Anyway, I'm
|
|
|