安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Hytera Programming Cable Problems - RadioReference. com Forums
Hi, I have two Hytera PD402i radios I bought a brand-new cable for them on eBay However, that cable has problems, and in Windows Device Manager, it has a warning logo next to it So, I got another cable from Amazon, and it has the same problems It could be because it is not a real Hytera
- IP Transit - RadioReference. com Forums
Moto -Enhanced Hytera-Full and thats no issue but since the hytera needs pseudo Maybe one way would be to make 2 channels in the moto, 1 for slot 1 and other for slot 2 auto scan with a 0 second delay and tx on slot 1 only So that way it will listen on slot 2 and tx on 1 so the SFR radio "should" accept that and send it back over?
- Setting Up “All Call” on Hytera DMR Repeaters and Handhelds
Here’s what I’m working with: Repeaters: 2 x Hytera RD982 (not networked or linked) Handhelds: X1e, PD602i, PD502i, PD362i, PD362 - of varying quantities (I am pretty sure all can do all call encodes and decodes) Mobile: MD782 Current Setup: Both repeaters are physically located next to each other but operate on different frequencies
- Building a DMR Repeater (Brandmeister) using a RD 982
I wrote an article about a year ago explaining how to build a Hytera RD982 DMR repeater on the BrandMeister network With the help of Terry Gillard, NX7R, this system has not only been successfully running, but I have since added a second DMR repeater at the same site Note: If you are
- Making a CPS multi-region. Solution for CPS area doesn’t match.
In Windows Explorer, open the CPS installation folder Proceed to the config subfolder Open tle last archive (either zip or 7z) inside it Open the Model dat file inside the archive Locate the line with [Area] inside the Model dat file Replace the lines below with: Number=5 Area0=0
- Hytera MD782G U1 Programming - RadioReference. com Forums
I have a Hytera MD782G U1 I can read the radio but cannot write I am using the front mic connector with the USB programming cable Firmware is
- Hytera HP 782 Not seeing communications Port - RadioReference. com Forums
I have HP782 running DMR Custom Programming Software V2 5 23 024NA2 I have also installed the Digital USB Driver Software that came with the CPS On my Windows 10 laptop it works as expected the software finds the COMM PORT I am in the process of upgrading my laptop to a newer laptop running
- Cant find Hytera software for flashing - RadioReference. com Forums
Second, I sold (and threw away) all hytera products because I couldn't get any help from anyone I now use Motorola XPR products which are way easier to upgrade, program and find support for, Motorola themselves are always happy to help, even with non-working or expired entitlements
|
|
|