Loading a small boat into truck bed - Tacoma World I'd put an end of it onto a furniture dolly Then lift the other end up and onto the tailgate Grab the other end off the dolly and lift push into the truck You'll also need an extender from the hitch to support the portion of the boat that is not sitting on the bed tailgate Overall looks a lot easier than loading a 500lb motorcycle
Bed Light Wiring Advice? (SOLVED) - Tacoma World Hi everyone and Merry Christmas! I installed my "factory" bed lights and I'm running into a problem - they won't light up! I ran out of daylight so
Bed mounted winch (lightweight pulling) - Tacoma World Use the bed bolts for the winch??? Another option is to mount the winch on a 2x6 and put in the bed pockets so that you can remove the winch if you need full access to the bed Could then put straps to the D rings to hold the 2x6 down while winching
Tacoma Loose Bed design Flaw explanation Second Gen Tacomas that go off road, fetch heavy loads or have campers with heavy racks can suffer from the loose bed issue The symptom will be a
Long bed vs Short bed? - Tacoma World Of those that have recently purchased tacos which bed option did you go with? The long bed (73 5 inches) or the short bed (60 inches) I currently
Bed Removal? - Tacoma World 6 bed bolts, remove gas cap (4 bolts), remove tail lights, bed electrical outlet, tailgate and camera There are a few clips you must remove off the bed by the tail lamps