安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Best general purpose (4w and 8w) mame joystick
The best case scenario will always be to have both a dedicated 8-way and a 4-way joystick in the same cabinet, or a dedicated 4-way games cabinet, and a dedicated 8-way games cabinet
- Who has the best replacement Midway Pac-Man joystick or who has . . .
Large Universal Joystick Adapter Plate (Ms Pac Man) Easily add a Sanwa, Zippy, or other joystick to a Ms Pac Man control panel with this 16 gauge steel adapter plate
- Whats the best switchable 4-way 8-way joystick?
However, Mousetrap does not do well with an 8-way joystick The issue I'm having is it's in a candy cab, so switching from 8-way to 4-way from the top would work best for me
- The Official Monroe Joystick Thread | Museum of the Game . . .
Monroe made great joysticks (2 4 8 way) and thanks everyone (especially andrewb and mgkastra so far) for your expertise, history and diagrams below! I'm going to collect a few notes in a list up here, but this thread has a ton of links, pics, and information about our beloved metal joysticks
- History of early joysticks? - forums. arcade-museum. com
What are some interesting things to know about early arcade joysticks? Stuff I've heard, intermingled with stuff I'm wondering: Sega Missile (1969) was first joystick (I guess distinction is it should use electrical connection only, compared to something where movement is mechanically
- Closest Decent Alternative to Atari Logo Stick for Gauntlet
I do love a well built atari logo joystick but they don't last long between rebuilds Wico with a softer grommets are typically what I use for the gauntlet machines that are away from home
- Lube for Joysticks?! | Museum of the Game® International Arcade . . .
I thought I read somewhere that every so often you should lubricate your joystick I have a DKJR - and I doubt it's ever had a drop on it, so what type of lubricate should I buy?
- Reproduction Universal Joysticks | Page 19 | Museum of the Game . . .
The joystick passes through the bearing housing and bearing and secured with a nylon nut holding the whole joystick assembly together These now need drilled out, then the centre needs a 14mm ball nose milling bit to create the curved inner surface for the ball bearing, chamfer added to the under side and the bolt holes drilled and tapped
|
|
|