安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Chain jumping every few crank rotations - Bicycles Stack Exchange
After a few pedal-strokes the rear derailleur completely gives out and the pedals drop to catch up After much googling it says the most common thing is rear derailleur adjustment is needed, so I h
- Why does my chain keep jumping off the front chainring on my 1x9?
Another cheaper and easier solution is to get a chain watcher There are several types and brands such as N-stop, K-edge, Paul Components This will sit on the inside and or over the top of your chain on the front chainring which will help prevent the chain from jumping off the front ring They are used widely in the cyclocross world to prevent
- Problem with chain skipping without trying to shift (even with new . . .
The problem is likely due not to anything from the chain or the cogs, but rather cable tension If the chain is trying to shift onto bigger (lower gear) cogs, then the cable is too tight
- Why does my gear slip when going uphill standing?
As an addendum to other answers, this was happening to me (not ghost shifting but the chain jumping forward) This started on a new chain, so I changed the cassette It still happened A test ride demonstrated that it only jumped in the middle chainring (by far the most used) even though it didn't look much more worn than the other rings
- Why do riders swing the bike out sideways when jumping?
When people do really big jumps on a bicycle or motorcycle, they'll swing the tail of the bike way out to the side once they've taken off Then it rotates back under them by the time they land Do
- Tiagra upshifting jumping 3-4 gears in middle of cassette
My Tiagra 10-speed shifters have recently been jumping multiple gears Shifting down (from smallest cog to biggest) is fine (10-9-8-7-6-5-4-3-2-1), though maybe a little stiff But shifting up will jump in the middle (1-2-3-4567-8-9-10) with single pushes of the paddle casing the gears to crash up multiple gears in the middle
- chain - Why does my rear cassette feel like its jumping when I put . . .
After putting everything back on I indexed the gears - finally getting the hang of the front but first time indexing the rear derailleur It all felt fine on the stand, but when I go uphill with the rear gears on the lowest cog (6), when the pressure is on the pedals I get a weird jumping, clunking thing keep happening
- skipping - When I am pedaling harder on a slope, the chain sometimes . . .
This is an easy fix albeit I will caution you, what I refer to as 'chain jumping' is one of the more dangerous scenarios when riding a bicycle Each time it jumps, from pushing hard on the pedal, the worse it becomes For the moderator, my experience comes from building over 400 bicycles, 2 3 of these vintage mountain bike conversions to road bike
|
|
|