安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- is the crank supposed to be hard to spin after installing?
95 s14 kaT t3 t04e (60 trim), bikirom, groundzero mani dp, 82 lb AMS FS 94 d21 kaE 4x4 stock Top Al_s14
- BC stage 3 vs JWT S1 cams - www. ka-t. org
ok sounds good I just got off the phone from Ben at Jim wolf tech and they told me that if I did their c78 race cams, stiffer springs and seats, 350z lifters and stock ka valves and seals, they gurantee that if your car is N A or boosted, you got more hp in all RPM ranges and the most wonderful thing is that your red line raises from 7000 RPM to 8300 RPM
- www. ka-t. org - Index page
KA-T Picture Threads This is for all those PICTURE THREADS ONLY Motor installs, product writeups, showing off your car, put the thread in here
- VIN number? - www. ka-t. org
future_kat Knows Some Stuff About 240's! Posts: 329 Joined: Sun Oct 30, 2005 11:55 pm Location: Cherry
- Does the EGR Need to Have A Block Off Plate? - www. ka-t. org
Dlauth Knows Some Stuff About 240's! Posts: 390 Joined: Thu Jun 21, 2007 7:24 am
- boost timing, knock, and tuning - www. ka-t. org
on a stock S13 ECU, the WOT timing map from 2800rpms to 6400 rpms varies very mildly between 27 degrees down to 24 degrees at 4000-5600 then goes up to 26 degrees to redline
- t2 vs t25 t28 - www. ka-t. org
ATLspeed Knows Some Stuff About 240's! Posts: 230 Joined: Fri Oct 12, 2007 5:44 pm Location: Eden, MD (Eastern Shore)
- Tune for Ka24de - www. ka-t. org
Silviadream87 Knows Some Stuff About 240's! Posts: 303 Joined: Wed Oct 19, 2011 7:08 am Location: Owasso, ok
|
|
|