安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Smith Wesson 6 1 2 Inch . 500 S W Magnum Revolver - Gunner Forum
The first 500 S W revolvers wore barrels that measured roughly eight and three-eighths inches, plus a compensator, resulting in a barrel that was about nine inches overall, and the gun measuring about fifteen inches in total length It was, by any standard, a large revolver
- Ruger American Rimfire | Gunner Forum
This is my new 22 rifle The one I have is the compact model with an 18" barrel and the 12 5" length of pull It came with both a low iron sight stock module and a scope sight module I ordered the full-length scope module to give it a try Switching them is easy - just unscrew the rear sling
- Lever Action Rifles | Page 3 | Gunner Forum
Lever Action Rifle Forum - Lever Action Rifle topics and discussion
- Lyman Scopes - Gunner Forum
Keeping the focal length long and lens or mirror curvature shallow is a classic way to minimize optical errors It's why those old spotting scopes you see pirates and pioneers using were extendable in several sections
- Winchester model 55 30 WCF - Gunner Forum
There was a toggle like thing on the end of the half-length magazine tube You flipped it up and unscrewed it, and then the barrel, forearm mag tube could be twisted and removed It was chambered for 30-30 Winchester and was quite accurate as I recall Bear in mind this was 60 years ago, I talked to a Winchester collector about it about 10
- only 1 gun law, G19 gen 2 vs HK vp9sk vs p365 | Gunner Forum
At 17 8 oz the P365 is about 5 oz lighter, 1 1 2" shorter in length, 3 4" shorter in height, and 1 4" thinner Sounds like a win, win plus you can get extended mags for nightstand or carry as a spare
- My Guide Gun and the loads I shoot - Gunner Forum
I recovered the bullet under the skin beyond the right front shoulder (full length penetration) The bear squared 9'6'' and had a 25 5 8" skull Amazing penetration!" Paul Lenmark, Boise, ID (coastal grizzly guide) Click to expand
- reloading data | Gunner Forum
Maybe someone reading this has a better idea for storing Lee case length gauges [ the rods ] , I have the shell holder cases , but have not found a good way to store rods It would be nice to have a box case that would hold the little ball , cutter and rods I reload - 25 ACP , 380 ACP , 45 ACP 38s , 9 mm , 357 , 10 mm , 44 mag and 50 AE Plus 6 or seven rifles
|
|
|