安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Camera, Lens Options | Yuneec Drone Forum
The lens can be changed quiet easily On my Typhoon H (CGO3+) I swapped the original lens to one made by Peau Production The main reason for doing so was not to gain more focal length but to improve color and sharpness, since many CGO3+ had some trouble with it Mine had blurry areas on the left side of every image or video The improvement is
- Peau 3. 97 lens install. | Yuneec Drone Forum
Just got to test the Peau 3 97 lens Jimmy Oliver with ShadowQuad installed in the CGO3+ on one of my H480's Used a Yuneec dark UV even though it was overcast This is a first pass focus but I was impressed with the narrower FOV and the increased focal depth Still working at getting camera
- CGO3+ LENS REPLACEMENT QUANDARY - Yuneec Drone Forum
The lens weight remains the same but the mass moment arm changes with movement of the lens elements The CGO-3 gimbal was not designed with multiple lens options in mind so any change in lens carries the risk of altering the weight and balance enough to prevent the software and actuators from fully stabilizing the image
- Olympus 45mm f1. 8 M. ZUIKO | Yuneec Drone Forum
Has anyone used the CGO4 with the Olympus 45mm f1 8 M ZUIKO lens? Just wondering on IQ and vibration etc
- Mini Zoom Lens for H ! | Yuneec Drone Forum
Said mini zoom as stated in my post and their description copied below: With it being over 40 degrees narrower than the stock GoPro lens, 8 degrees narrower than the DJI Inspire X3 and Phantom 4 3 cameras and 16 degrees narrower than the Yuneec H CGO3+ camera, this lens brings your subjects closer without being too zoomed in to introduce unwanted image jitter Available in a large selection of
- Lens upgrade opinion | Yuneec Drone Forum
Hey flyers Out of all the different upgraded lenses - which would you consider best Not interested in the 8 X mm from PEAU TIA
- CGO3+ lens replacement adventures - Yuneec Drone Forum
The "surgery" itself went without surprises - disassembled the camera, removed the sensor module, removed the lens mount, installed one from pixaero, installed the lens and put it all back together In the end it even felt less complicated than i expected it to be (even the lens mount came off the board without much resistance and fuss)
- Lens cover for C23? | Yuneec Drone Forum
As jb57 states, the lens of the C23 is in fact a 39mm lens and; Yuneec does supply a 40 5 mm adapter ring but since you mentioned you don't know much about photography stuff I would add that typical camera lenses (DSLR's, Point-n-Shoots or whatever), have a lens that is threaded female and all standard lens filters and covers like the one in
|
|
|