安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Lithophanes - Vectric Customer
The lithophane was cut full depth in a single pass at 0 04" gap below model Since I used raster and cut at 315° the first cut is shallow and short so the bit can take it without breaking The step-over was set at 10% and feed rate at 50 The bit has a cut depth of 3 16" plus a tapered cutter at the top that cuts to 1 4" diameter
- John Deere tractor lithophane - Vectric Customer
John Deere tractor lithophane by tonydude919 » Tue Jan 22, 2013 2:52 am Here is a John Deere Tractor made for a friends son, he's into tractors
- Lithophane lighting - Vectric Customer
Lithophane lighting by Dennis P » Tue Dec 09, 2008 6:23 pm I've been making some lithophanes out of 1 4" Corian and have been reading about different ways to backlight them It seems like the most of the suggestions might be somewhat costly I had a thought about this and I would like to get some feedback from the readers here
- Lithophane boundary vector - Vectric Customer
Re: Lithophane boundary vector by Brian@Premier » Thu Jul 10, 2014 7:49 pm [quote="JamesB"] You will need to offset the boundary inwards by the tool radius to account for this Thank you James I did try a vector offset with - 125" witch is the radius of my 25 bit" thinking that if I used a positive number it would cut past the vector
- is this the biggest outdoor lithophane - Vectric Customer
Re: is this the biggest outdoor lithophane by Rcnewcomb » Thu Feb 20, 2014 6:48 pm I have seen larger half-tone images, but nothing as large as your design that was a true lithophane It's time to contact Guiness World Records! For reference, below are the half-time images at the San Jose Airport and the Oakland Cathedral of Light
- COLOR Lithophanes?!? - Vectric Customer
They look the same as a regular Lithophane from the front without back lighting (and if you give them a light spray of mat-white lacquer you can't see the transparency from the back side also)
- Video Tutorial for making lithophanes in Aspire - Vectric Customer
I have seen references to a video for making lithophanes in Aspire but so far haven't been ableto locate it I have the pdf and it mentions one also The only v
- Sophus Lithophane - Vectric Customer
Sophus Lithophane by kaartman » Thu Jul 14, 2011 12:34 pm This is to show one of my latest projects that I completed using Aspire, This is a Lithophane of Sophus Falck, he is the father and founder of the happy family that I am working for
|
|
|