安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Thinking of buthering a Miruko. . - Cast Boolits
Hey all, Would like some opinions on the feasibility of rechambering an 1895 Miruko 405 to 35 WCF I have several originals, but frankly like them far too much to do much load tinkering! I have one new manufacture 95 ine405, but am contemplating another for the project
- Assembly tips needed Browning Model 1885 High Wall, Miroku made
I would love to hear from someone who has disassembled the Miroku made Browning High Wall, I have one in 45 70 with a failure to fire after years of use, I tried first to flush out any residue but still had the problem of it stopping at a half cock position every time I try to fire it
- Winchester Miroku 1886 Rebounding Hammer Fix Tutorial - Page 2
I have a Browning (Miruko) Model 71 from the original run they made late 1980's (?) They are different than what was shown in this thread - coil spring yes, rebound hammer strut no, half cock notch yes, --- the rebound feature was built into the bolt with a three piece firing pin and some other bits - mine suffered light strike = failure to
- Opinions on Felix Lube - Cast Boolits
Felix, the 45colt that is getting the leading is actually a Miruko made Winchester 1892 chambered in 45 colt I slugged the barrel on that ol' girl and found that the barrel lands are 4525 I have a star lubesizer that I used to size to 452 so I think that should be O K unless there are some variations in size in the middle to end portion
- Need 45 Colt load data for rifle, Cast or Jacketed - Cast Boolits
We have been shooting mostly shorter range steel targets and I was using Laser Cast 250 RNFP with ok results for steel plates etc at closer range and on paper out to 50 yards
- Cast Boolits
Please note that if you are using a high risk VPN to register, your profile may be placed in a banned status
|
|
|