安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- DRL On Off Trick - VW Forum
Daytime running lights Basically as soon as you release the ebrake your headlights turn on MK4 MK5 Owner
- Tips for installing an aftermarket stereo - what I wish. . .
Hi Folks, For those of you contemplating installing an aftermarket stereo in your MkV Golf Jetta GTI, here are a few pointers I learned "hands-on" when installing mine - tips I wish I would have had before I started Hope this helps the next proud VW owner who takes on this task 1 You
- Mk5 golf rough idle and stalling | VW Forum
Mk5 golf rough idle and stalling Tags 2 0tdi mk5 golf rough cold start rough idle stalling Jump to Latest 743 views 1 reply 2 participants last post by John-Arteon Feb 18, 2025
- Central Locking Issue | VW Forum
2009 MK5 Golf 2 0 TdI, issue I have is the central locking will not work with key fob I have changed battery etc and tried reprogramming it but still nothing
- MK5 misfire - VW Forum
Hi friends, I have a 2006 VW GTI FSI 2 0 turbo, I keep getting this 2 codes P030100 and P030000, The engine runs fine, it accelerates fine and I do not see any issue but I keep getting those 2 codes, I’ve recently replaced the coil pack, cleaned throttle body, cylinder compression it is 150psi
- Up To Date Advice on Door Lock Actuator Failures
However, you can use the standard Mk5 OEM assemblies and they do work, but you'd have to completely disassemble it to swap the lock pin arm if you wanted to keep the lock pin That's the only real difference between the Mk5 and Mk4 door lock modules is the change in arm for the door lock pin
- 1. 9tdi bxe camshaft or injector seals? - TDIClub Forums
Hello everyone, I am having an engine issue with my golf mk5 1 9 tdi bxe engine Has these symptoms: 1 Hard cold start and hot start 2 White smoke for some seconds while starting cold 3 Bad smell 4 Rough idle (shaking and loud also while revving) And i came into a conclusion that it might be
- (Solved) Mk5 1. 9 TDI BLS crank no start after tandem. . .
Decided to change the head cover gasket and tandem pump gaskets to resolve some leaking oil After putting it all back together, the engine turned over, ran poorly for a few seconds then died, after that it just keeps cranking The RPMs jump to around 200 (have to check the exact numbers in
|
|
|