安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Cummins NHC 250 vs 6CTA 8. 3 opinions - SteelSoldiers
CONS -- parts availability, starts better than the NHC-250 in cold weather but still needs a sniff of ether I've had both NHC-250-powered trucks (M929A1, M928A1, M932) and 6CTA 8 3-powered trucks (M936A2, M932A2 and now two M925A2s) While I love the 6CTA 8 3 motor, I would suggest that anyone who is interested stick with the NHC-250-powered
- Cummins NHC 250 vs Mack ENDT 673 - SteelSoldiers
I have a quick question Are these two engines anywhere near the same ballpark in regards to horsepower and torque output? I know what is in the manuals but can they be tweaked reliably to perform basically the same?
- NHC-250 Fuel Injector Removal Clean Re-install Parts List??
Hey, What are the recommended parts Tips Tricks when removing, cleaning, and re-installing the clogged fuel injectors on an NHC-250? Any guidance Tips from those who have done it would be greatly appreciated! Thanks!! :beer:
- turbo on a NHC 250 Cummins? - SteelSoldiers
is it possiable to but a turbo on the Cummins motor that's in the most of the 5 tons? or will it turn out to be to much trouble for any gain that would be gained? just inquiring, thanks Jason
- Killing NHC 250s -what we have learned killing 3 of them.
The NHC 250’s have become sort of infamous for cavitation caused liner failure We saw some pitting damage in two motors but none on the third Chasing cavitation issues was a red herring for us, it distracted me from what I was doing that was actually killing them
- NHC 250 safe power Mods. - SteelSoldiers
The NHC 250 does not have piston coolers, so you will not be able to run it hard They did make small cams in the 400HP range though You can step up to 290-300 injectors only if you turn up ur fuel pressure you add more stress on the camshaft when you turn up the rail pressure Switch to a #15 or 17 plunger fuel button
- CUMMINS NHC-250 Problems - SteelSoldiers
What are common problems for the CUMMINS NHC-250 engine? I am going to pick up a M818 XM818 soon, and it would greatly help me if I knew what problems I could face on the way home (450 miles one way) Thanks in advance!
- NHC 250 head bolt torque and sequence | SteelSoldiers
Can anyone point me in the direction for head bolt torque details? Scoured the tech manual had everything but that (also searched prior postings) Have a 923 that had new? Engine installed before decommissioning, and after 2 oil changes and water in oil both times, am going to start
|
|
|