安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Spread axle- pros cons - Yellow Bullet Forums
Spread axle will scrub the tires much harder However, they're easier on the tow vehicle, because the axles support the weight over a longer area, which means less porpoising
- Whats a good size winch for car trailer? - Yellow Bullet Forums
Drove to nebraska to pick up a 57 4dr chebbie sunk and sitting on frame, ran winch line out and once i popped it up out of the ruts, not only 4 flat tires, but 4 locked up brakes it straight lined pulled it just fine upto and half way up the ramps, at that point with winch cable wrapped up on spool reducing overall gear reduction a bit, had
- Blue Print Engines-any good? | Yellow Bullet Forums
Blueprinting and engine is a generic term (from back in the day) that in a ideal world means that all clearances etc are set to the preferred spec
- Trans Fluid for powerglide - Yellow Bullet Forums
Sunset Performance Engines DG Machine Drag Racing Components! EMAIL @ Jeff@DGDragparts com Smith Bros, ATI PROCHARGERS, AFR, Dart, Brodix, CFE BMF, Profiler, Manley
- 68 Camaro rear wheel size | Yellow Bullet Forums
Currently I have a 15x10 with 4 5 bs The tire is even with the quarter panel so it sits up kinda high Going to mini-tub it pretty soon and get a wheel with between a 5 5 or 6 5 bs to help tuck the wheel and tire under the car more and lower the rear end some
- what size winch for an enclosed trailer | Yellow Bullet Forums
The only time I EVER had to use a snatch block on my 2500lb winch to get any vehicle up, I picked up a 57 chevy in Nebraska my grandfather wanted It was a farm field find, 4 flat tires and car sunk to the frame in the field and once I got it popped out of the 4 ruts all 4 tires locked up tight too
- Oil filters - Yellow Bullet Forums
Went to a local Grainger and picked up a B6 Made in Nebraska, no drain back valve and no oil bypass It was $13 and some change Looks like a good and sturdy filter, I just might stick with these My only complaint is the louvers inside the filter look kind of small
- plugging the speedo hole - Yellow Bullet Forums
Most good parts stores will have a selection of single cup type expansion plugs I don't remember the size but you could measure the I d of the speedo hole with a caliper and head to a part store
|
|
|