12. 6. 6 Packet Tracer – Configure IPv6 Addressing (Answers) 12 6 6 Packet Tracer – Configure IPv6 Addressing (Instructor Version) 4 4 6 Configure IPv6 Addressing Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only
Packet Tracer - Implementing a Subnetted IPv6 Addressing Scheme . . . Part 1: Determine the IPv6 Subnets and Addressing Scheme Step 1: Determine the number of subnets needed 8:ACAD:00C8:: 64 and assign it to the R1 LAN attached to GigabitEthernet 0 0, as shown in the Subnet Table For the rest of the IPv6 subnets, increment t
CCNA 1 v7. 0 Curriculum: Module 12 – IPv6 Addressing Packet Tracer – Implement a Subnetted IPv6 Addressing Scheme Your network administrator wants you to assign five 64 IPv6 subnets to the network shown in the topology
12. 9. 2 Packet Tracer - Configure IPv6 Addresses on Network Devices . . . Contents 12 9 2 Packet Tracer – Configure IPv6 Addresses on Network Devices – Physical Mode Answers Topology Addressing Table Objectives Background Scenario Instructions Part 1: Cable the Network and Configure Basic Router and Switch Settings Part 2: Configure IPv6 Addresses Manually Part 3: Verify End-to-End Connectivity Reflection Questions Download Packet Tracer ( pka) file: 12 9 2
11. 10. 2 Lab – Design and Implement a VLSM Addressing Scheme (Answers) 11 10 2 Lab – Design and Implement a VLSM Addressing Scheme Topology Objectives Part 1: Examine Network Requirements Part 2: Design the VLSM Address Scheme Part 3: Cable and Configure the IPv4 Network Background Scenario Variable Length Subnet Mask (VLSM) was designed to avoid wasting IP addresses With VLSM, a network is subnetted and then re-subnetted This process can be repeated