安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- What is Your Method for Measuring Scope Height? - Snipers Hide
I have a few techniques for measuring scope height for use in a range finder ballistic calculator However, I'm curious What does everyone else do to measure the height of their scope above the bore? For a follow-up question how far off the actual height do you think you can be until it
- SAKO TRG-42 factory trigger replacement | Snipers Hide Forum
The pic without the ruler is in the cocked position one pic is with the ruler in the cocked position and one is in the fired position There is some movement in the post fired state, maybe 125 inches but nothing near like the first stage in the cocked position Hope this helps View attachment 8232633 View attachment 8232634 View attachment
- Microsoft Word - CHARGE WEIGHT TUNING FOR ACCURACY AND THE ASSOCIATED . . .
BACKGROUND Vaughn and Kolbe carried out a number of evaluations whereby a rifle was instrumented in a manner to measure movement of the muzzle during shooting and the subsequent effect on accuracy These and numerous other vibration studies focus on transverse bending wave behavior whereby the barrel muzzle vibrates up and down like a ruler suspended on the edge of a table does after it is
- MOA and Milrad Turret Calculations | Snipers Hide Forum
I mainly follow the reloading forum, and only have experience posting from there, so I’m not sure how to post in a different forum yet Regardless, this post is all about figuring out Scope Turret dial up in MOA and Mils, when you already know the bullet drop in inches based off a trajectory
- Criterion barrels - Accuracy | Snipers Hide Forum
A while back, I decided that I wanted to go with barrels that would stand up to hard use a bit better than the run of the mill Ballistic Advantage or Roscoe type barrels and decided to go with Criterion I went with a 14 5 Core to run with a 10x scope, a 13 9 Core to run with an ACOG and a 12 5
- Best MIL to MOA Conversion Scale | Snipers Hide Forum
Why would I need to convert? I have a ruler 3 inches in front of my face in mrad and mrad turrets That and fractions suck, base 10 is better
- Brass Marker jig | Snipers Hide Forum
If you need a straight edge to be buy a 50 cent ruler This is the way Notice there's no marker on that template I posted I have a little insert, so the case heads sit up a little proud from the case gauge and used to just drag a marker across the top; when getting fancy for a match, I would rotate it 90 degrees and draw another half-assed line
- MIL and MOA Range Equations Explained Derived - Snipers Hide
Re: MIL and MOA Range Equations Explained Derived I read the paper, and it's good information Nice work, and good drawings It's probably most interesting to math mavens, but it's a good explanation of the derivation, for those like me who remember things better when they understand how they work
|
|
|