安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Recommend gun smiths in Maine | M14 Forum
I am looking to get my Bula XM21 bedded and looked over So far I’ve found Angus arms co in Wiscasset Bucksport Gunsmiths LLC Either is not that far from me The only one I can find referenced on here is angus arms co I know the m14 is a more advanced platform and I don’t want just anybody
- Anyone know anything about Arlington Ordnance? | M14 Forum
They were done by genuine master armorers and 'smiths, and the 308's were made to especially tight specifications However, ALL the gas cylinders were bored out, and the pistons on the operating rod ends were all larger than specification
- Smith Enterprises M14 Adapter Castle Nut Type | M14 Forum
Anyone know of any place that has them in stock? Midway is backorder, Doesn't Show on Brownells site, Shows back ordered on Smiths site and i got to say they are not very good on communicating with you about your backorders and such
- S W Model 59 - M14 Forum
Though most of the pistols used in that movie are 2nd Gen Smiths, those don't seem to pop up a lot around these parts, so I settled on 3rd Gen Smiths Have several 5906's, a 4006, a 4506, even a 2nd Gen 645
- Failure to feed and eject | M14 Forum
At my wits’ end Any thoughts on how to fix this? Any good M1A M14 smiths in dfw, Tx? It almost looks as you suggest that the ejector is sticking out too far and pinching the case rim and not seating I looked at my 4 rifles and the ejectors all sit flush or below flush with the bolt rim
- Gunsmiths Armorers who work on M-14 type rifles. | M14 Forum
M14 Smiths in Northeast Kansas ? Any one know any good M14 smiths in Northeast Kansas - Kansas City Leavenworth area?
- Super Match Smith Identification (Read Op Post First, Please)
My understanding is that only a handful of smiths in the country would be able to build this rifle There are no markings on the heavy barrel, only markings I could find is the serial number in the stock channel Don't see anything on the heel or trigger to suggest it came out of GN's shop
- What Is Best M1A Trigger Upgrade - M14 Forum
The downside is your rifle is out of commission for a while I’ve done a side by side comparison and the Shooting sight trigger is as good as the professional jobs on my rifles The key is having GI hammer and trigger This was voiced by the smiths doing my rifles, and has been repeated here in the forums
|
|
|