安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Standpipe (firefighting) - Wikipedia
A standpipe or riser is a type of rigid water piping which is built into multi-story buildings in a vertical position, or into bridges in a horizontal position, to which fire hoses can be connected, allowing manual application of water to the fire Within the context of a building or bridge, a standpipe serves the same purpose as a fire hydrant
- Standpipe 101, Part 1: A Beginners Guide to Standpipe Firefighting
What follows is a four-part series overview of standpipe systems, the National Fire Protection Association (NFPA) codes that regulate them, equipment selection, hose loads, and even some thoughts
- TYPES OF STANDPIPE SYSTEMS - National Fire Sprinkler Association
A standpipe is a system of pipe that delivers a water supply for hose connections and automatic sprinklers in combined systems Standpipe systems are typically installed vertically from floor to floor but are considered horizontal when two or more hose connections are installed on a single level
- Standpipe System Design and Calculations - NFPA
Standpipe systems consist of piping and hose connections installed throughout a building to provide reliable water for the manual suppression of a fire by either the fire department or trained personnel
- What Are Standpipes, and Where Are Standpipes Required?
Standpipe systems are fixed piping systems with associated equipment that transports water from a reliable water supply to designated areas of buildings Such systems are typically provided in tall and large-area buildings
- Standpipe System Explained: Most Common Types and Main Functions
A standpipe system involves all the components that make it possible to transfer water from a water supply to the several hose connections in a building These connections facilitate the firefighter’s work during a fire
- Standpipes for Fire Suppression: An Introduction - MeyerFire
The intent of a standpipe system is to avoid having to distribute and connect hundreds of feet of hose for a single interior attack by firefighters Hard-to-reach areas of a building aren't confined to one direction
- Standpipe Systems: Design and Installation Requirements
NFPA 14 identifies three classes of standpipe systems: Class I systems designed for use by fire departments with 2 ½-in hose connections, Class II systems designed for use by trained personnel or fire departments with 11 2-in hose connections, and Class III systems designed for use by trained personnel or fire departments with both 1 ½-in and
|
|
|