安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Solved A tube with a rectangular cross section is to be - Chegg
A tube with a rectangular cross section is to be fabricated by stereolithography Outside dimensions of the rectangle are 38 mm by 60 mm, and the corresponding inside dimensions are 30 mm by 52 mm (wall thickness = 4 mm except at corners) The height of the tube (z-direction) = 40 mm Layer thickness = 0 10 mm, and laser spot diameter = 0 25 mm
- Solved A tube with a rectangular cross section is to be - Chegg
A tube with a rectangular cross section is to be fabricated by stereolithography Outside dimensions of the rectangle are 40 mm by 70 mm, and the corresponding inside dimensions are 32 mm by 62 mm (wall thickness = 4 mm except at corners) The height of the tube (z-direction) = 50 mm Layer thickness = 0 10 mm, and laser spot diameter = 0 25 mm
- Solved A prototype of a part is to be fabricated | Chegg. com
In the stereolithography process, the layer thickness = 0 15 mm Diameter of the laser beam spot = 0 40 mm, and the beam is moved across the surface of the photopolymer at a velocity of 2200 mm s Compute the minimum possible time (use units of hours, 3 significant figs) required to build the part, if 25 s are lost each layer to lower the
- Solved The square cup-shaped part shown in Figure 32. 10 is - Chegg
The square cup-shaped part shown in Figure 32 10 is to be fabricated using by stereolithography When completed, each part is carefully weighed and the average weight is 29 grams Raw material costs $82 5 per kilogram and it costs $19 28 for shipping Actual labor for each part is 18 minutes and the laborer makes $15 5 per hour However, the
- Solved A cone-shaped part is to be fabricated using - Chegg
A cone-shaped part is to be fabricated using stereolithography The radius of the cone at its base=35mm and its height =40mm The layer thickness =0 20mm The diameter of the laser beam=0 22mm, and the beam is moved across the surface of the photopolymer at a velocity of 500 mm s
- Solved A tube with a rectangular cross section is to be - Chegg
A tube with a rectangular cross section is to be fabricated by stereolithography Outside dimensions of the rectangle are 39 mm by 59 mm, and the corresponding inside dimensions are 28 mm by 51 mm (wall thickness = 4 mm except at corners) The height of the tube (z-direction) = 39 mm Layer thickness = 0 09 mm, and laser spot diameter = 0 24 mm
- Solved Stereolithography (SLA) and Solid Ground Curing (SGC) - Chegg
Stereolithography Stereolithography is a technique for layer by layer structure fabrication, where a laser beam is focused to a free surface of a photosensitive liquid to induce polymerization of the liquid in that region and transform it to a polyme …View the full answer
- Solved A tube with a rectangular cross section is to be - Chegg
A tube with a rectangular cross section is to be fabricated by stereolithography Outside dimensions of the rectangle are 3 8 mm by 6 0 mm, and the corresponding inside dimensions are 3 0 mm by 5 2 mm (wall thickness = 4 mm except at corners) The height of the tube (z-direction) = 4 0 mm
|
|
|