安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- What is a synchro and what are its types - AutomationForum
A resolver is a variant of synchro and it has two stator windings displaced by 90 degrees, it can be used in a similar way as synchros to transmit data in a control chain using a resolver transmitter at one end and resolver control transformer at the other Resolvers are used in robot control and radar system What is the use of synchro
- Whats the differences between a Resolver and a Synchro?
They both have a single-winding rotor But the stator of a synchro has three windings oriented 120 degree apart and electrically connected in a Y-connection The stator of a resolver differs from a synchro in that its stator has two windings oriented in 90 degree
- how to get the angle from a 3 phases synchro signal
The end result is a synchro angle THETA that is a straight line when plotted against the original indicator values The simple relationship Y = mX + b is used to convert the synchro angle THETA into the displayed units of the analog mechanical indicator, now ready for a digital display as symbology and or readout
- motor - Old 7-wire Autosyn resolver: how to use it? - Electrical . . .
It's not a resolver transmitter, because it does not have 6 wires (or 4 if all returns are tied together), and it's not a synchro as defined above because it has more than 5 wires (4 if the wires are tied together) I thought it could be redundant as well but this doesn't check out either I hope it's two-speeds somehow
- LTspice IR2104 SynchroBuck Simulation problem
I am trying to simulate a basic synchronous buck converter with LTspice but transient analysis won't go above 0% when I connect the NMOS part Without NMOS part which is below HO and LO just do the
- Common Reasons for Pressure Gauge Failure and Solutions - AutomationForum
S No Problems: Solutions: 1: Pressure Gauge Always Showing 0: Isolate the main isolation valve and open it Isolate manifold isolation valve and open it Identify and clear any choking in valves, manifold, or gauge Check for any other potential issues not covered and address accordingly Check and replace faulty pressure gauge if necessary
- Synchronous AC motor, principle, construction
The synchronous motor is an AC motor that works at a fixed speed in a particular frequency system This motor requires direct current (DC) for power generation and has a low initial torque Therefore synchronous motors are suitable for initial use with low loads, such as air compressors, frequency changes and motor generators Synchronous motors […]
- Step-by-Step Guide: Converting Electrical Diagrams . . . - AutomationForum
Efficiently convert electrical diagrams into PLC programs for industrial automation with comprehensive step-by-step guidance Start optimizing automation processes today!
|
|
|