安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- TYPICAL or TYP notation on drawings | Eng-Tips
TYPICAL or TYP indicates the number of places the geometry feature or dimension appears on a drawing It could be in ANSI ASME Y1 1-1989 Abbreviations for Use on Drawings and in Text
- Typ, Both Sides and Other Notes | Eng-Tips
TYP is useful when there are no discrete quantities One example may be if you have a series of meandering and braching channels where multiple depth and width dims may actually be more confusing than helpful, and where a qty would be based on POV on how one sees counts a branching channel's beginning or ending
- TYPICAL or TYP notation on drawings | Page 2 | Eng-Tips
The "TYP" callout was often used in wall sections to reference typical or common elements of a section In mechanical engineering, you often see this callout on hole dimension and the like
- ANSI Y14. 5M 1982 and use of TYP | Eng-Tips
Is the use of TYP or Typical acceptable and if so can someone point me to a reference that calls that out? I have an orange copy of Dimensioning and Tolerancing ANSI Y14 5M -1982 On page 18 1 9 5 Repetitive Features or Dimensions it specified you can use "X" but I see nothing regarding
- slab isolation joint - 1 2 typ? | Eng-Tips
What is the width of a typical isolation joint for a concrete slab on grade? As in the type that would interface between a column footing and slab, a generator pad, or around the perimeter of a 'floating' slab? I have used 1 2" in sidewalks I've poured but have limited experience pouring (or
- Expanded use of ALL AROUND Symbol | Eng-Tips
axym and PeterStock: Yes, I am talking about putting the all around symbol on the bend of a leader which is calling out a radius or a chamfer in lieu of using a word description such as "ALL AROUND", or "CONTINUOUS" under the dimension We do not use "TYP"---too vague
- use of typ. on a drawing | Eng-Tips
You may even use TYP 5 PLACES as a local note (make sure you call out the number of PL)as long as it is clear It is a good practice to have seperate drawings for L H R H to document say tooling changes on one that may not be needed on both drawings , (tool hole etc )it just gives you better control of Drawings
- ID SYMBOL PREFIX SUFFIX | Eng-Tips
I am new to NX after using UG years ago Anyone know a way to add a prefix or suffix to an id symbol callout? We typically use "typ" or "5X" next to the symbols as information to aid in quantities Thanks
|
|
|