Unitronics macros for eplan - HMI All-in-One) Hello! I dont find enywhere; if unitronics macros for Eplan p8 even exist? I need Jazz, and all visilogic macros for Eplan On "main" unitronics website i dont find it Does macros even exsist??
Uni Logic Message composer CheckSum - UniLogic Software - Unitronics . . . I attempted to include the ETX directly in the message string instead of specifying it in the device properties However, UniLogic requires the message terminator to be defined in the device properties for proper checksum calculation
New VFD Startup - VFDs - Unitronics Support Forum: Programmable . . . I am trying to do a startup on a new VFD Hardware is mounted Motor wired Can control motor speed manually from the front of the drive Just trying to so a simple control Start the motor and set the speed (No reverse or anything else ) Using RS485 input to drive from UAC-CB-01RS4 P00 01 set to
Info mode online access or PLC Software check I only use 130s and I do it all the time with remote units Both RA via Visilogic, and direct RA The only thing I encounter that is different from being in front of the panel is that button pushes get immediate response
CompactLogix Unitronic Ethernet IP comms programming Hi all, I have managed to setup communications between my Unistream USP-156-x10 and CompactLogix PLC using Ethernet IP and an Adapter node in the Unistream, and a Generic Ethernet Module and the CompactLogix PLC I can successfully transfer and received 32bit data (DINTS or INT32) between the two