安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- VTP Pruning Mode: Enabled - Cisco Learning Network
Consider 4 switches vtp pruning enabled in a full mesh way The administrator wants to add a another switch 5 to switch4 without vtp pruning enabled on switch 5 switch 4 is vtp enabled and switch 5 isnt So switch 4 cant decide what are vlans that are required by switch 5 So switch 4 breaks the vtp pruning and forward all the vlan traffic to
- Cisco Learning Network
VTP servers advertise their VLAN configuration to other switches in the same VTP domain and synchronize their VLAN configuration with other switches based on advertisements received over trunk links VTP server is the default mode Client—VTP clients behave the same way as VTP servers, but you cannot create, change, or delete VLANs on a VTP
- What is Ciscos official recommendation in regards to VTP?
Hi Ing and thanks! OK, so Cisco does recommend not to use it for an established network However, based on what you posted and what I have heard as well and found online, the only reason EVER that a switch added to a VTP network will overwrite its VLANs is if the VTP domain is not set up properly with a VTP domain name AND a VTP password that only the IT admins know
- VTP version downgrading upgrading - Cisco Learning Network
Scenario 4: vtp version 3 server - vtp version 1 client -----vtp client changes version from 1 to 2 VTP works, vlans are propagated But VTP doesn't work when a password is configured Scenario 5: vtp version 2 server - vtp version 3 client -----This scenario is obscure to me DTP works, but newly added VLANs are not propogated via VTP
- VTP off vs. No feature VTP. Difference? - Cisco Learning Network
On Cisco Nexus 7000 Series devices, because VTP is a conditional service, its MIB is loaded only when the corresponding feature is enabled But its then followed by: The CISCO-VTP-MIB does not follow this convention It is loaded by the VLAN manager and will always return the correct values whether the VTP process is enabled or disabled
- VTP Pruning vs Allowed VLANs - Cisco Learning Network
While VTP pruning does have some drawbacks there are valid use-cases for deploying VTP and VTP pruning For instance, small remote sites with a small number of switches and a limited number of VLANs can safely benefit from VTP and VTP pruning
- VTP primary server - Cisco Learning Network
Dist1#vtp prim This system is becoming primary server for feature vlan No conflicting VTP3 devices found Do you want to continue? [confirm] Dist1# Dist1# *Jan 19 23:47:47 468: %SW_VLAN-4-VTP_PRIMARY_SERVER_CHG: fa16 3e0b 225e has become the primary server for the VLAN VTP featuresh vtp status VTP Version capable : 1 to 3
- VTP modes - Cisco Learning Network
So, can vtp client switch shutdown vlan, or this case can happen only regarding neighboring vtp server switch shutdown a vlan? 3-"T o reduce the workload for the Spanning Tree Protocol (STP) by limiting a VLAN to a single access switch", this is also mentioned in Odom's book So, if this is recommended, what is the need of using vtp? Thanks
|
|
|