安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Status code 23, socket read failed, during client backups or . . . - Veritas
Status code 23, socket read failed The keyfile dat file in the <Install_Path>\NetBackup\bin\ directory resulted in bpcd issuing the prompt and waiting for a passphrase, and remaining as a running process Troubleshooting: Verify that bpcd is listening on the client, and attempt to connect to the bpcd port (13782) on the client in question
- Intel XTU service fails to start; exception in XtuTuning. Initialize()
If the problem persists after that, please provide the latest Intel® XTU log files that reflect those changes: using File Explorer: go to folder = C:\ProgramData\Intel\XTU, and zip the Log files or entire folder Note: Uncheck "Hide System Files" to see the AppData folder
- Motherboard code 23 - Troubleshooting - Linus Tech Tips
It’s also possible that the code is reading E2 which only says “Video Repost” as the description I would recommend a CMOS reset first and then try reseating graphics card or switching to onboard video
- Re:xtu not opening - Intel Community
Restart the XTU Service, or restart the computer Share new XtuCore logs available in C:\ProgramDate\Intel\Intel Extreme Tuning Utility\Logs Specifically the XtuCore file after the issue was reproduced, which will now include additional information details [ INFO ] Looking forward to your response Regards, Randy T
- Invalid BIOS image and Cant Read File errors appearing
From GIGABYTE's website, download the latest compressed BIOS update file that matches your motherboard model Uncompress the downloaded BIOS file, save it to your USB flash drive, and rename it to GIGABYTE bin (Note: The USB flash drive must use the FAT32 file system )
- getting status code 23: socket read failed. . | VOX
15:00:50 696 [24993] <2> set_job_details: Sending Tfile jobid (8533) 15:00:50 696 [24993] <2> set_job_details: LOG 1239874250 16 bpbrm 24993 bpcd on Tmxweb exited with status 23: socket read failed 15:00:50 696 [24993] <2> set_job_details: Done 15:00:50 697 [24993] <2> job_monitoring_exex: ACK disconnect
- bptestbpcd resulting in socket read failed status 23 for . . . - Veritas
It should fail with the expected error, "bptestbpcd: EXIT status = 23, socket read failed" From the NetBackup Administration Console, run the Logging Assistant to run the NBSU on the client, then collect Debug logging and the NBSU output
- Re:Intel XTU (eXtreme Tuning Utility) STUCK on Splash Screen
I would like to know if you can follow through with the steps we recommended in our previous response—uninstalling XTU, executing a cold reset, resetting the OC BIOS settings to default, and reinstalling XTU
|
|
|