安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- To Get the Right Armhole, Fit the Bodice - Threads
Fitting an armhole requires fitting the bust dart, shoulders, and side seams There’s more to fitting an armhole, also known as an armscye, than you may think It requires fitting the bust dart, shoulders, and side seams And the only way I know to successfully fit an armhole is to use a muslin
- How to Transform a Standard Curved Armhole into a Square-Cut . . . - Threads
Drop a line down from the armhole, parallel to the center line Extend a line horizontally from the underarm that is perpendicular to the center line These lines are drawn in blue Also mark points where these lines intersect the original armhole You will transfer these points to the sleeve armhole
- armhole adjustments for large busted - Threads
(I let the seam allowances remain on the pattern piece ) I located the bust point and made a X at that point on the pattern I located where the dart should start at the armhole, measured over for how big the fold should be at the edge, then drew in the dart so that it started at the edge of the armhole and ended up in a point at the bust point
- Armhole and Sleeve-Cap Seam Worksheet - Threads
Fitting sleeves can be a challenge, so this article is welcome I do have a question though on where exactly the end points for the segments are in the sleeve armhole Some like shoulder point and underarm notches are clear, but not all patterns have the dots in the upper arm and there are additional points which I have not seen in patterns
- shoulder and armscye fitting - Threads
You will notice that the point where the front armhole and sideseam come together has moved upward, and that the curve in the armhole now makes a sharper turn at the point you marked on the armscye This change will have removed the gaping at the armhole, assuming that you enlarged the bust by the correct amount 8
- French Dart for Fit - Threads
5 Close the armhole dart Bring the armhole dart legs together and tape the dart closed The French dart opens 6 Tape tissue under the armhole and the French dart Draw dart legs from the side seam to a point 1 inch from the bust apex (for fuller busts, place the dart point 2 inches from the bust apex) 7 True the side seam and armhole seam
- how do I finish armhole on knit tank top - Threads
Check for the direction with the most stretch, lengthwise or crosswise and cut your strips that way Check the strips by pulling a sample to see how much stretch the strip has If there is a lot of stretch, Cut the strips about 1 4 to 1 3 shorter than the neckline or armhole that is being bound Then sew them in
- How to determine armhole size - Threads
I am trying to figure out how to determine the correct size for an armhole when putting a set in sleeve in a shirt or dress I have instructions in one of my books that says to measure the armhole, and add 2 inches Another instruction form I have tells me the the raw edge of the sleeve opening should just touch where the arm and body meet
|
|
|