安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- Inconsistent Peer VLAN ID - Cisco Community
I'm having some trouble trying to figure out why I'm getting the following errors in my logs This morning, for the first time in over a year, my switch stopped communicating with my core switch, so I checked the log Feb 27 16:25:15 364 UTC: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsi
- Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4
The switches are not rebooting or having links that change status before the appearing of the log "Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4" so I'm at a point that thinking about something else is becoming difficult
- Inconsistent peer vlan Problem in Switches - Cisco Community
Inconsistent peer vlan SW0 1 -3650#sh spanning-tree summary Switch is in pvst mode Root bridge for: VLAN0001, VLAN0010-VLAN0011 SW01-3650#sh run int g1 0 23 Building configuration Current configuration : 89 bytes ! interface GigabitEthernet1 0 23 description SW02 switchport mode trunk end ----- SW0 2 -3750X#sh spanning-tree summary Switch
- Solved: Inconsistent peer vlan c9500 issue - Cisco Community
Start a conversation Cisco Community Technology and Support Networking Switching Inconsistent peer vlan c9500 issue Bookmark | Subscribe
- Solved: Loop Inconsistent - Cisco Community
I am getting Loop Inconsistent for a port in a vlan I have two links for that vlan for a client But all the time it is required to shutdown and again no shutdown of switchport How can I get rid of it permanently The switch log is given below: SW#show spanning-tree inconsistentports Name
- Inconsistent peer vlan and Inconsistent local vlan
This makes Nexus complaining about inconsistent peer vlan and Inconsistent local vlan In short, I need to "translate" vlans 31,32,33 into vlan 21 Vlan translation 1-to-1 won't work as I can't add multiple entry with same translated vlan Vlan translation n-to-1 won't work as it makes QinQ (as far as I get it from documentation)
- %SPANTREE-2-BLOCK_PVID_PEER: Blocking Inconsistent peer vlan
Hello Comunity! Spanning Tree %SPANTREE-2-BLOCK_PVID_PEER: I know there are a lot of posts about inconsistent peer VLANs being blocked But in my situation, both switches are in the same mode "Switches are in Rapid PvST mode", all VLANs are allowed on the trunks, and both switches have the same VLANs
- Received BPDU with inconsistent peer when adding VLAN
Inconsistent local vlan 004971: Jun 30 11:15:27 826 CET: %SPANTREE-SW1-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 401 on Port-channel116 VLAN1000
|
|
|