安裝中文字典英文字典辭典工具!
安裝中文字典英文字典辭典工具!
|
- How can I dispose of large glass mirrors?
Donate A mirror or especially a broken mirror can be reused for many arts and crafts type projects like a mosiac Check with schools university or with any local artisans, they might take it off your hands Finally, in thier spare time one could create a funkadelic disco ball from the mirror and then sell it on eBay for a small profit
- Flattening frameless wall mirror - Home Improvement Stack Exchange
I'd agree with DA01 here It's far more likely that your wall isn't perfectly flat rather than the mirror being distorted The simple way to test this is to get a spirit level - or anything with an edge you know is true - and lay it across the mirror If it doesn't lie flush then the mirror is warped You can do the same with the wall
- 3 Drive Configuration | TrueNAS Community
It will work You can create a pool with only a single 3-way mirror and at a later date add another 3-way mirror to the very same pool The pool will then extend according to the size of that new mirror Such a pool will be and remain safe and stable It is not ideal because at first, all your data will be on your first mirror
- Single or Multiple - Mirror plus other disks - TrueNAS
Uhm, this would leave you without redundancy again And if you need an encrypted pool, it's probably because you store sensitive and important data on it
- Confusing Auto TRIM description | TrueNAS Community
I was considering enabling TRIM for my SSD Mirror pool, but the description text for "Auto TRIM" somewhat confuses me: Enable for TrueNAS to periodically review data blocks and identify empty blocks of obsolete blocks that can be deleted Unset to incorporate day block overwrites when a device write is started (default)
- walls - What can I use to hang a frameless mirror? - Home Improvement . . .
The one 'frameless' mirror that I have is in the dining room, and it's probably 30 lbs, but it has a wooden frame behind it and a set of small metal clips that go over the edge onto the front of the mirror and then screw into the wooden frame
- Bathroom Lighting Switch Motion Sensor solution
I have a bathroom mirror with built in led lighting around the mirror casing It is controlled by a touch switch on the front of the mirror I would like to control the light by using a motion sensor switch (Lutron Maestro Motion Sensor Switch | 2 Amp, Single Pole | MS-OPS2-WH)
- can I use 1 4 J Channel to mount 3 16 thick mirror?
A mirror that big will have some flexibility if there is some room behind it Especially when you press on the mirror such as when cleaning it I would recommend using a padding technique on the back of the mirror to give it a firm seating against the wall whilst at the same time causing it to flush out against the front inside edge of your J
|
|
|